Search results for query: *

I have had 3, 73 Chargers, and a 72 Satellite all console cars and none of them have had that strap.

I asked the painter to do the center resessed section of the hood in black. Not sure on the stripe over the roof.

The reason for this post is, the body goes to the painter next month and I still dont know what color to tell him. B5 is a great color in my opinion, but, there are just so many of them. Q5, another great color, not blue and not green, both I guess, and you dont see any. I recently found K6...

Just for kicks, this is how I found this car.

I am building a 72 SSP. Not a stock build at all. Tunnel ram with dual quad EFI sitting above the hood. Stock ride height on QA1 suspension. Full interior in black. The car was roginally yellow with the gray lower portion below the SSP trim and white interior white vinyl top. That is all...

Between K6 Autumn Bronze Poly, Q5 Coral Turquoise Poly, or B5 True Blue Poly. Which one is the coolest color?

Sold

Video of the Belvedere.

I am listing this car for a friend. I dont own it. 1965 Plymouth Belvedere. 1971 440 with 727. Manual steering and brakes. Body is excellent. Paint is really nice. Car apears to have been a race car at some point in the distant past. Has sub frame conectors on it. Home made exhaust dumps you...

I have done standard cluster to rallye cluster swaps. It is simpler to replace the dash harness with a rallye cluster harness. Other wise each wire in the standard cluster round pin conector must be indentified and re terminated to the correct location on the rally cluster. Back lighting, some...

What about using a combination of spray on Lizard Skin and a adhesive backed product together?

I used a product like this in my 73 Muscle Rat. Inside stays cool even at 110° in direct sun. Used it on the floors and roof...

I could have saved myself a lot of time and a little money fitting the steering column shaft to the rack. I was trying to fit a third u joint and bearing to get around the headers. I had the column in place but not fully secured. I noticed that it was not straight with the steering wheel where...

The trans mount is mocked up. I am going to hold off on welding it together till I have the correct engine adpter plate. Using my home made spacers for mock up, the trans is probably not at the correct orientation. I am using the original trans isolator body with poly isolator rather then...

Yes and yes. They are Indy heads, and the headers were custom made.

Halo roof? I think that is what they called it.

The Hemi is in the engine compartment. Has a fitment issue. Passenger side head and valve cover hitting the shock tower. Cut away the hump on the tower and plated it. The steering shaft also has problems. The big 2 1/4" tube header on that side is in the way. No direct line from steering...

Ran in to a problem. Called JVX Racing for a big block to small block adpter plate. Find out he is having health issues and wont be shipping for a while. I need to get the engine and trans bolted together and in the car to modify the tunnel. So I made some 1/2" plates to temporarily hang the...

I started putting my rear QA1 4 link with a Dana axle in today. I am having an issue with the u bolts for the trailing arm brackets. The bracket wants to be very close to the and of the axle housing. The dana axle tube gets larger there. That one U bolt needs to be a little larger. Probably...

Time for more pictures. The frame stiffenening kit is done, all welded in. I started on the new suspension. QA1 front and rear. Double adjustable coil overs, tubular k frame, 4 link in the back. The front is pretty much mocked in where it needs to be. I need to take the springs off the coil...