Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am curious to know if anyone of you have had to change a Stop Light switch on a 67 Charger? My brake lights and tail lights do not work. My turn signals work. I have changed all of the bulbs Twice! My headights work, my bright lights work, my interior lights work. So I'm looking at the...
I have read so many posts for the last 6 months and have tried to resolve my dash lights not working but no luck. This morning I realized that I do not have my 3 new relays installed for the rotating headlight buckets. Do those relays have to be connected in order to complete the circuit to...
I have a service manual and have used the Instrument Panel Wiring diagram for my guide but can't find the three wires I need to connect. I had removed my dash cluster to install new lenses. I re-installed the dash cluster and the following items work: headlights and the wipers, interior light...
I was watching a YOUTUBE video on installing a distributor in a big block. I have a 426 Hemi, first time for me, and I had posted months ago a question on setting my dual point distributor into the engine. I understood that I was to make sure that the oil gear drive was set in with the "slot"...
I have no spark on one set of points in my dual point distributor, original to the 1967 Charger Hemi. I am checking all of my wiring as I have installed all new wire harness.
I brought the #1 to TDC, installed the distributor and was setting the points before I did the dwell. I have spark on...
Yesterday I was installing my new dash bezel/instrument panel and I couldn't find the male connector for the white wire coming out of the speedometer, see attached photos.
I have attached the Instrument Panel wiring diagram and highlighted the white wire, which goes to the Electroluminescent...
I have attached a few photos of this yellow wire which come through a small hole in the firewall but is not connected. It was this way when I bought the car and even though I have re-wired the entire engine bay harness and all 3 blocks, I am not sure which block this goes to. On the other end it...
I'm trying to install my starter wiring harness today and I'm finding it difficult to connect the wires to the starter by going around the exhaust manifold from the bottom. So my question is how do I placed the wires in such a way that they can be connected to the starter. Do they go through the...