Search results for query: *

I have read on this forum that my 67 charger hemi with the power steering box shoukd have a 90° brass fitting , which I have. The new power steering hose that I have purchased also came with a male fitting that faces straight up. The hose does not fit onto the straight fitting nor does it fit...

I need to buy the bracket that secures the rear brake proportioning valve to the frame. See photo attached. Thank you in advance.

When I bought my car, the engine was out of thr car and the brake booster was sitting on the Seller's bench, not to mention all of the other parts in boxes. I didn't take the rubber cover off of the booster until a few weeks ago and found that it has a large break in the shaft receiver for the...

I bought a pair of dust shields as I am rebuilding the front end on my car. I see in my service manual it calls for a teflon seal that goes on first before you tighten down the dust shield. I have looked online to buy a pair of shield seals with no luck. Any suggestions? You would think a pair...

I am removing my K-member with the steering box. I removed the worm shaft roll pin and have carefully pryed the lower coupling up , to remove from the gear wormshaft. I did not get it pryed all the way off the gear wormshaft so I can remove the K-member. I have two questions: 1st- should I be...

I attempted to dismantle my front end this past weekend so I can get new bushings pressed into my control arms and also replace the other front end components. I have had many BBodies forum members send me replies to remove the torsion bars, watched videos on removing the to Torsion Bars, bought...