Search results for query: *

New parking brake cables for 62-65 B-body/62-66 A-body, $65 plus shipping from the Savannah Tn area. PM me here if interested and thanks for viewing...wb

'187' big block oil pan with 3/8" pick-up, very good condition, $150 plus shipping from the Savannah, Tn area. Pan is clean with good paint, ready to install. PM me here if interested, thanks for viewing...wb

Misc carburetors, see the pictures for condition and base stamping numbers, and enquire as required. Located in the Savannah, Tn area, pm me here for more info and shipping costs. Thanks for viewing... Note...the one 4640 is missing some parts while all others are good rebuildable cores. I...

Decent running 318 with 727 coming out of my '67 Belvedere. I don't know if this is the original, replacement engine or if any work has been accomplished other than a small cam & lifters (so I was told), Edelbrock intake and Jegs distributor, no carburetor. I ran a cranking compression test on...

Custom Strange Engineering drive shaft for b-body with D60 axle and 1350 u-joint, complete with 7290 front u-joint and Spicer slip yoke. Used very little in my former stock eliminator car, see picture for length, 50-3/8" CD. No longer available, thanks for viewing...wb

4 pairs of NOS Chrysler u-bolts for rear axle companion (aka: pinion yoke...see the part numbers on the envelopes), $50 for all 8, plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing my ad...wb

New, in-the-box Edelbrock Performer intake manifold for low deck B-engine (361-383-400), still in the bag with gaskets and 12 pt bolts, plus the paperwork, $300 plus shipping from the Savannah, Tn area. PM me here if interested, thanks for viewing my ad...wb

I have a few misc clutch discs that have been kicking around my place long enough, here they are: 2 ea, NOS 11" Zoom rag disc, 1-3/16-18 spline (street hemi/440 hp), $100 ea plus shipping 1 ea, 11" McLeod rag disc. 1-3/16-18 spline, $100 plus shipping 1 ea Schiefer 10.5" paddle sintered bronze...

I have a friend that has a 1971 340 he'd like to sell so here's the scoop on his 340. If you need, contact me here and I'll forward his contact info to you, then. Thanks, much appreciate...wb 1971 Mopar 340 Engine . Run's, will need to be gone through . Block casting number # 2780930 -340-5 ...

One slightly used B-body 3" ms drive shaft, 7290 detroit with slip yoke, 1350 on the companion/axle end. This was a Strange kit cut for b-body 727/833 to use with a D60 rear axle (not the same length as an 8-3/4), excellent condition. It has my typical 'barber poll' paint with black and mopar...

Nice Moroso B/RB chrome valve covers, very nice, no rust or damage, $95 pr Used steel 833 shift forks, $125 pr New steel 833 shift forks $175 pr Fresh 8" A-1 converter with out-of-cert 6 bolt flex plate and bolts, $500 New 7" center sump B/RB oil pan, $120 32" ladder bars with new ends, new...

3 pairs of steel shifting forks, 2 with the nubs removed for use with early non-theft side covers, $90 pair plus USPS shipping from Savannah, Tn 38372. Hurst shifter mounting brackets, (see the numbers), excellent condition, $75 each plus USPS shipping. One older style iron detent side cover...

Complete disc brake assebly for b/e-body. 1971 10" drum spindles, Scarebird adaptor kit with Galaxy rotors and calipers, hoses, wheel bearings, dust caps, 3" ARP wheel studs, caliper plates, everything needed to install on Dodge/Plymouth B or E-body platform. These parts are all brand new except...

New everything for Scarebird drum brake spindle/disc brake conversion. For those of you not familiar with Scarebird, the owner is a Mopar guy that adapts other brands disc brake components to Mopar drum brake spindles, and they actually work quite well too! I have a pair of 10" drum spindles off...

A pair of 10" spindles from my 71 Plymouth, Scarebird adapters and bearing spacers, oem hubs, new replacement vented rotors and calipers for a 1970 Ford (you heard right...FORD), 3" ARP studs, new wheels bearings and seals, hoses, etc. These parts are all new (except for the spindles and OEM...

Virgin 906 B/RB heads, tanked, cooked, shot blasted, mag'd, new K-liner guides, diamond lapped, and surfaced. New Ferrea 2.08 in and 1.74 ex, 5000 series stainless valves, guides cut for .531 seals, hard exhaust seats installed, comp valve job cut with Sunnen/quick-way system, all work done by...

I have a few sets of B/RB 6 bolt vlaves: Moroso chrome and OEM 68/9...$75 per set plus shipping from Savanna, Tenn. Please note, the OEM are of one side not both so they both have breater stacks. PM me here if interested, thanks...

This is a virgin set of 915 B/RB cylinder heads, cleaned/mag'd/cooked /blasted/hard seats installed on the exhaust, new 3/8" K-line guides, spring seats cut for 1.550 springs, New PEP 2.125 stainless intake valves, New Ferrea 1.74 5000 series stainless exhaust valves, comp valve job, guides cut...

New, in-the-box quick ratio Mopar 20:1 steering chuck for production manual steering boxes. The factory uses a 24:1 so this will have a little more effort to turn the car, not for power steering lovers! $235 shipped USPS flat rate in the continental US. PM me here if interested, thanks!

For those of you that might have a series 3 carrier/powr-lok/spool and desire to use 4.56 and lower (pro 9310 4.30 and numerically lower), I have an new old stock Mr Gasket spacer w/bolts, $40 plus USPS flat rate in the lower 48 states, Pm me here if interested...thanks for viewing...