Search results for query: *

I did a search and only got 3 results, so the question is, will any gasket work? I am new to Aluminium heads (first set), so please be kind. I have seen so many different kinds and price ranges, what am I looking for? I need schooled, thanks.

I replaced my 8.25 rear-end with a 9.25 sure grip. When looking at the carrier the outside was machined and looked like it was 2 pieces. Was the OEM unit as cast or machined? I'm thinking the carrier might be an aftermarket unit. When I was able to try it out the sure grip gave out to a one...

I'll make this short. I have a 400 block that has a 4.375" bore. I have been looking at the Keith Black 240 pistons in a .030" overbore, so 4.372". Keith Black has the piston to wall clearance at .0025" min in a street motor, and .005" in a drag motor. So my question is this the piston I...

How does a stock thermoquad behave with a motor that has low vacuum? Vacuum is 6" to 7" at idle. I have been messing with a Edelbrock 800 cfm carb and can not get the off idle bog to go away, the rest of the carbs' operation is doing just fine.

I have switched the stock TQ and intake to a Edelbrock 383 intake and 800 CFM thunder series carb on my 77 400 Chrysler Cordoba. I am using the stock fuel line and pump with a 3/8" hose attached to the end of it to the carb. My problem is when I go WOT the new carb seems to be sucking more...

A quick question. The rebuilding book I'm looking at states to put the timing marks close as possible (i.e. crank gear 12 o'clock and cam gear at 6 o'clock) together. Reading on this site, this is wrong and that both marks need to be at the 12 o'clock position for the motor to be at TDC on #1...

Tried the search, did not find an answer. Like the title states, how much lift can the stock springs on the 452 BB heads take? Thanks

How much horesepower do you think one would get by putting on a set of stealth heads on a smogger 400? You should see about a one point increase in C/R with the stealths being a 80CC head. I'm putting in a hughes whiplash cam and was thinking about putting on a set of heads while I was in...