Search results for query: *

So I got the manifold back from Willson and test fit on heads. They are 440-1 (345cc). Chambers were worked on, then heads decked to keep CC correct. This was all done by INDY in their 345 cnc package. With a .015 gasket I can install bolts but they are at the very top of the slot hole (Meaning...

I'm installing the 572 this weekend and was having issues with the motor plate leaking at the water pump. What would be the best way to seal it up without worry of leaking? Aluminum block / Motorplate / Meziere water pump / ARP studs Felpro Gaskets on either side? Gaskets and sealant on both...

As some may know, my brand new 572 was sent back to INDY to fix a balancing issue. Its is finally fixed, and was run on their dyno for a few hours to break in, and a couple power pulls were done. It made 781hp and 680tq. I am hoping with the right intake and throttle body these numbers go up...

Hey Guys, I’m hoping someone can talk me off the ledge right now. Finally got the 572 INDy Max installed and running but I here is a really bad vibration that start around 2,000 and gets worse to 3,000 then starts to get better but never really goes away. Short block was built by INDY the rest...

I post a roll bar question in another thread earlier and thought of a few other things I cant get a grasp on. In anticipation for Drag week in September I want to make sure I'm legal to run 10.00 index, At what point are the following needed? 1. Trans blanket or shield 2. Roll bar padding 3...

I will be running Drag week in September with my 66 Satellite. I have a roll bar that has allowed me to run to 10.00, that no track official has ever had a problem with. What I'm concerned about is I don't use "D" Bars as I often have my kids in the back seat going to car shows and such. I...

Went to install the 572 and realized it's an 8 bolt crank and my 6 bolt B&M flex plate won't bolt up so I'm stuck till I get a replacement. Any recommendations on something that will hold up to 900+ Hp with a brake? Ohh and I need to order this overnight so quick help is appreciated.

Had a 572 Maxx built by INDY and the cam that was speced has been on order at Comp for over 6 months. The short block is done just waiting on the cam. Comp states they don't have cores and cant even tell me when they would be available. Need this thing together before Carlisle (JULY) and I also...

Just got the new 572 from INDY and I'm working to put together A crank trigger package. Heres my problem, INDY supplied me with an ATI917470E balancer that retains the stock pulley location. I want to run Andy's AR177M crank trigger bracket for use with Jesel belt drive which I have. The AR402DM...

Currently Assembling a INDY MAX 572 for my 66 Satellite. Looking for the best possible wet sump oil pan with a QA1 K Member, Torsion bars and factory style steering. This is a stout street car and want to give this engine the absolute best possible oil pan for longevity and HP. Externaly oiled...

Hi guys, Quick question. I’m in the process of lashing my valves on my solid roller and I always use the EOIC method. I recently read somewhere that when the exhaust valve just begins to open you should adjust the intake but when I do this I actually get a looser lash setting as the exhaust...

Found this on you tube and thought I would share. Pretty crazy stuff...

This weekend was my second attempt at some decent drag strip numbers, but what I'm seeing is a RPM wall around 6300 that no matter what i do I cant get past. I posted up a video from last week in another thread that i will repost here showing the poping and banging i'm seeing at higher RPM's...

I will be taking the Satellite out to the track tomorrow for the first time. Up to this point I've only run 92 pump gas through the motor and the most timing I can run without detonation is 31 degrees all in by 2000. I will be running 110 race gas tomorrow and was looking for suggestions as to...

So I'll be hitting the track for the first time this weekend and after going through my checklist I thought about hood pins and was wondering if I needed them or not. I am using a bolt on AAR Fiberglass Hood w/Hemi scoop. I know it's probably a good idea but I like the look without them and was...

Anyone else going? I think this is the first time it's venues are on the east coast. My car is close to ready and will be running in Street Race Naturally Aspirated Big Block Class.

Just got my trans in and I'm on the fence about what trans mount to get. I want a stock rubber mount to cut vibration and I'm running rubber mounts on the engine with a beefy custom torque strap. Has anyone actually broken a rubber mount that wasn't just old?

Bought a Milodon external oil pick up for my 440. Supposed to work with stock motor mounts and they offer another version for motor plates which i did not get. It Uses the Milodon oil pump, cover plate and pan so you think it would work together. Not sure what Milodon had in mind but no matter...

I have a question about the reverse lockout function of the TCI Outlaw shifter. I want to know (from anyone with first hand knowledge) if the reverse lock out function needs to be momentarily tripped before moving into reverse from neutral or if it actually needs to be held forward with the...

Anyone know what the torgue spec on -1 heads are? Also if you had a sequence chart that would be great too. In the garage hope to get some help.