Search results for query: *

Hello all : i recently spoke to a Auto Wrecker that I used to get parts from 35 years ago.They are still operating but most of the old vintage cars were crushed for steel value sometime ago. they still have a couple of buildings which have lots of Moparts and mechanical stuff from the sixties...

well I got my new trans mount installed and against a lot of opinions from some of my mechanical friends the replacement has cured all my issues.Feels like a new 58 year old car! The vibration was even noticeable at a certain RPM in neutral which means it was resonating thought the crossmember...

thanks to all. My bearings were toast on their own but the tech found a broken tranny mount. I have to source one

they haven't Road tested it yet but my concern is If there is a problem with the pinion angle is it going to keep ruining pinion bearings ?

I also have a similar bad vibes........ 40 mph + on light acceleration I feel shuddering under drivers floor and felt in the steering wheel. My U-joints are good and my transmission tail shaft is fine. If I put the car in neutral at 50 mph it coasts smoothly with no vibration at all.2 days ago...

hello all; I am chasing down a vibration/resonation in my 66 Coronet (stock engine) and I am going to change out the spark plugs in case it is a misfire. Anyone have recommendations on the best spark plugs application for this old girl ? Thanks

the hole saw is an odball 3 and 3/4 not found in hole saw kits marine stainless cupholders and the hole saw avail on amazon. I used cedar for weight and Velcro on the underside of the cut hump arches that grip the factory carpet

After many beverage tip-overs i tried to find a cup holder and or cup holders for my bench seat 66 Coronet. The only options I found that looked retro we're in the $300 range so I decided to take matters into my own hands. With one piece of cedar about an inch thick i i managed to attach three...

hello all my 1966 Coronet has one of those retro stereos that was made to look like a factory radio but it finally bit the dust. It wasn't very good quality or sound to begin with so I had decided to look for an option that would fit in the glove box. this unit his Bluetooth and has many other...

My 66 has no bumper guards front or rear but otherwise I believe 67 bumper will fit the same.

I would check resistance at the Flux-Capacitor ?

1966 440 trim 318 Poly I love the Chargers and the Satelites !

whoa ! think the same as if it was your daughter and a male teacher did it. It would devastate you as a parent.

I use the Lucas hot rod classic oil.It claims to have the zinc and all the other essential vitamins

good advice Jerry..... thanks for your input.

Hello all ; I have a 1966 Dodge Coronet 318 Poly 2bbl, automatic transmission. The drive train is all original to the car. The car has driven flawlessly for about 4,000 miles since I purchased it in the fall of 2022. I have developed a vibration which is noticeable under load at low speeds...

hello from Ontario east ! I wanted to get a 66 Charger but most were out of reach. Congrats and welcome. lets see a pic

good price I wish I needed them

if you have those deer whistles you might want to face them the other way as you may be calling them instead of warning them ?

there is a set for sale on here..... mine are a little blemished but not with replacing for a driver car. I could see not installing them after a restoration.