Search results for query: *

Would some one know the dimensions of a 383 four barrel air grabber filter element used on ‘71-‘72 hoods? I know 14” diameter do not know correct height. Thanks. POPS

Has anyone used a Dale’s Cuda air grabber rubber seal? I just opened mine and have a hole off a mile. I know I can drill it and use it fill the bad hole with liquid neoprene and get over it BUTTT Here’s a picture! Paid $125 for it

Has anyone used Auto City Classic back glass on their ‘71? Also where is it made? Sent a message to ask and got no response.I have a line on a good used original from Jimmy B. just curious about the new Auto City Classic piece.If it’s made in China will definitely go with a used original...

Pictures before-during and after!! Turned out awesome!!! Big thanks to Tim& Brian at Turk’s auto body in Minooka,IL.

Jimmy Boros (airgrabber.com) sent these pictures and text for hood pin hole location.Hope it helps other members.I used a 1” hole saw upside down in the ovel shaped hood opening and a 7/16” center punch to locate the pilot hole.Worked great.

Going to add hood pins to my ‘71 air grabber hood during its restoration.Any one ever use Pro Source brand kits??? I see Dales Cuda also has a kit available for my application.Which kit do you all recommend? Is the Dales kit worth the extra cost?? Thanks POPS

Finishing up the drive line this winter.Just picked up parts from the powder coater. Get the old girl back on the ground so I can start on the air grabber hood!!!

Are there any manufacturers supplying in tank pump tanks for ‘71 b body’s? I plan on going EFI on my RR this winter and want to go with in tank pump if possible.Looked on Holley tanks but nothing for my ‘71.

Anyone running Borla S Type mufflers?? I need to quiet my ride some and get rid of the obnoxious drone at cruising speed. Hell I had to take my hearing aids out!!! (And that’s no B.S.— LMAO). Let me know if you like them.

Early build date 8-70 1971 RR. 1 1/8” or 1 1/4” shaft for the pitman arm? Sure do not want to pull the arm to measure. Thanks!!

Just back from road trip to Battle Creek MI. Picked up a VERY nice complete ‘71 Air grabber hood.Rust free original paint with all the operating parts included.The three year search is now in the books. Got a great cash deal from Mario that sells parts in the Detroit Metro area.Great honest...

Installed new to me (used) ‘71 tail light assembly.Running lights work fine but the back up bulb will not light up.Used 12 v tester and I have power to the center of the contact for the bulb....BUT ..... the sides of the socket are hot with 12v also. Shorted socket???? No pinched wires back...

This ‘71 hood release set up is listed on e bay. It has the most often missing release rod holder bracket on it. I searched for months for one and finally bought a complete set up like this just for the rod holder. If your missing the bracket here it is!.NOT MINE

Has anyone ever attempted to rebuild the internals of a bulb socket? Found the rebuild parts are available. You can get single or double contact internals.

Getting ready for the black on the grill.I have Fusion satin black but thinking it could be matte black.Both colors are available,just don’t want to mess up now!!!!

Painted the silver on the grill yesterday.I used Krylon Fusion metallic shimmer and could not be happier.Will wait till fully cured mask and put the black on it. What a huge improvement,it had about what looked like 10 coats of black on it.The guy at Proteck Coatings here in town turned down his...

Why do you suppose when I install my wiper arms on the drive spindles,seat them all the way down so the holder clip will seat in the slot.The blades are 11/2” off the windshield???? I even tried another set of arms SAME!!!! The arms are all ‘71 and one set is NOS. Sure do not want to bend or...

Clay bar——Hand glaze—- and Blitz. MAN WHAT A JOB !!!! (For a old fart) Any volunteers????? The deck lid,top and hood are ready for wax. FREE BEER and Monday is $1 taco day at the local bar!! WELL????? I’m just sayen........

Going to Indy this weekend and one thing on the list is a new package tray (shelf).Any advice on brand or vendor?? I need one with speaker provisions.Also do most use the insulation or not??

I need to pull the passenger side quarter glass to reattach the chrome seal holder. Are there any roller replacement kits available? The kits I have found only go to ‘70 or ‘73-‘74.