Search results for query: *

I would consider a oil change and run maybe a step up in thickness as this could be the bearings are loose . I would not run a high volume oil pump. After speaking with Bob K on my 440 years ago I was informed not to run one as you could empty the pan on the far side of the tach. Keep in mind...

Thanks...

Correct - I should have been more specific.

Our '69 Charger is coming to the end of a two-year restoration. My wife and I are the original owners. North Carolina allows a "year of manufacture" plate to be used on the car if the car is actually registered as an antique vehicle, but apparently it is not required to use a plate actually...

Red l appears for manual steering application

LOL I think i'll keep her around for a while. well long while as my wife loves the car as much as I do. when I got the car late August, it had sat a while and had a 120 mile drive home. I changed the oil before driving home as it was old. I used rotella 15w40 for the ride home, changed it the...

I remember that, Bladecutter was talking about it: Unlimited Air Racing Who Likes Aircraft ? For All Aircraft Nut's.....a Hemi counterpart...the Incredible Howard 500 Who Likes Aircraft ?

Yes ! One is an OEM Chrysler 300 Dual Quad Intake. As Momma Mopar Equipped A Small Amount Of 300’s Back in The Day ! One OEM intake is for B motors ( low deck ) 383 / 400 . Second OEM Listing As Clearly Indicated Is an RB ( tall deck ) 413 / 426 / 440 version . Then There’s The Weiand Dual...

Keep the Faith, a LOT of Us, are Right There, with Ya !!!

If a guy put a dipstick tube and dipstick in the block and measured from the oil pan rails to the low and high Mark, you could then measure down into your pan and have a good starting point.

70 didn’t receive the blackout, they got the aluminum bezel painted black and polished center stripe. This is also where the newer cars with the racetrack tail lamps got their design... they copied the shape of the trim panel. Body color is under the trim bezel and doesn’t cover the entire area.

Even tho Fran Blacker enjoys them so much, I'm only gonna post one more with an airship in this thread - at least for a while... This is mainly a challenge /brain exercise for Mr Dave6T4... :lol:

It may very well NOT be mandatory but...... It most certainly CANNOT hurt, is very simple to do, and may very well save you a short(or worse!!!...) if a bare wire comes in contact with something it shouldn't. Been there....done that.....

Nice looking RR, Myself I think it is a ticking time bomb. Since I'm only 1 state away I will take it off your hands to help you out. :lol: What weight of oil is in it ? Most all these 70s V8s are getting a little loose even after a standard ring and bearing rebuild. The pump and mabey a little...

I bought door glass and vent glass from AMD. The door glass was fine, but one of the vent glass didn’t have the right curve to it.

Oh it wasn't all that fun when I could still do that kind of work lol but it felt good to look back after getting it done! At 73, I feel pretty much worn out....

All I can tell you is what I found done to my car. Previous owner had added a return line to a 383-4V car. They sent the return line into the tank where the shorter of the vent lines plugged in (the two coming off the driver side of the tank) and for some dumb reason smashed the nipple on the...

Not that i'm aware of unless you put in a larger blower motor and hamster wheel.

so is there anyway to make the heat and ac selections blown near what vent speed is ?

Same here… I’m ready!