Search results for query: *

Just what does a PV actually do? I have rear brake lockup under heavy braking. Does it reduce volume or pressure? I bought one off EB and now, even adjusting the valve up and down no fluid is getting past that valve. To me pressure reduction would be what I'm looking for, as volume will still...

Since the only pressure hose available is a universal which always is much too long. I took a chance and ordered one for a 69'. It was just right in length but the end that attaches to the gear control valve was too big for the fitting on the gear. I looked for a later valve but the prices even...

Parking brake. Is there a return spring on that cable assembly where the three come together? There was a cobbled-up one when I took it apart. Rear brake line. Where does it route through at the left side of the firewall? Thanks

I tried about everything I could think of but no luck. They are about three inches to long with the suspension at it's bottom position. Nothing in the instructions say's a thing about insulation. I even though they might be adjustable by turning by holding one assembly while holding the other...

Is this kit one that's desirable? Any suggestions on who to buy from? And anything to watch out assembling them? https://www.ebay.com/itm/224559621123?hash=item3448cbe403:g:JEIAAOSw0Pdd05z7 I tell you I'm death on any automotive machine shops. My luck had be no luck to outright suspected...

I changed out the water pump housing for a car one with great care and the dimensions were the same. However, the threaded holes in the ends of the heads are not the same. Plus I'm not sure how these power steering brackets go on with another big front balancer on a cast crank with non-AC. Many...

Been looking here and the net and no luck. Thanks

By shimming the K frame maybe a half-inch? Anyone else try this. I know steering column and rear trans mount would need to be modified for the increased height.

I can see my bushings are deteriorating. Can I just replace them, or go the expense of one of these kits ? Are the shafts subject to ware ? I have 64k original miles...

Need just the brace, this place "Parts Geek" is the only one I found that sells it alone. I've dealt with these guys before, with good service. However, their selection of body parts isn't the best. http://www.partsgeek.com/ss/?i=1&ssq=shock+tower+braces&x=19&y=15

Do the front tires remain there original center line track placement ? Some kits I have had experience with the tires end up setting out side the normal track...