Search results for query: *

You are correct lol This is my first eddy carb. I’ve always ran Holley carbs including my six pack I’ve rand for about 31 years lol

Thank you for the info. I ordered new fuel and vapor lines in stainless. Also purchased new hose. I think I may purchase Edelbrock wood spacer. I want to fix this problem and not worry about driving the car when it’s hot out.

How much tuning have you guys done on out of the box edlebrock carbs? This motor is stock with stock cast iron intake.

Thank you. Having some issues myself.

Looking for folks who are using the new AVS2 carbs on their stock 440’s. Should I be leaning towards a 800 cfm or a 650 cfm? Thanks in advance

Have any pictures of that set up?

Who do you guys recommend for new fuel lines? Finelines/SSTubes or inlinetube? Thank you

When I purchased this car it has a new looking fuel pump. With this fuel issue I have do I need to be looking at replacing the fuel pump also? I’m running an edlebrock 800cfm carb and haven’t been able to drive this car in the heat sitting in traffic as it wants to stall or does stall. I don’t...

Would you happen to know what the WIX number is with the orifice in it? My 68 R/T 440 is having these issues and would like to be able to drive it in the summer.

The upper ball joints I already replaced as they were worn out. Car has some miles on it.

I would like to rebuild the front end of the charger as it’s time with the mileage. Is there a front end rebuild kit that anyone recommends? I don’t want the cheapest but some quality parts that will last. Thank you

Does anyone know the oring size for the pressure line to the pump for 70 Charger The part number is 1859445. It’s discontinued Thank you

Where is the best place to find the correct lug nuts for 69 charger wheels. The wheels are the magnum style with trim rings. Attached is what is currently on the car. Had a couple of them back off on a in town trip last night and not sure if these wheels use a specific lug nut. These are right...

Ok I cleaned up the temp sender that was on the car. Did an Ohm test and it’s at 248 cold out of the car. If I put this back in the car tomorrow and the gauge still doesn’t work then what direction should I go?

I’m having some gauge issues also. Where did you get a new circuit board with a built in limiter?

I was able to drive the car to work Saturday. Had been off the road since 1991. Everything went great!

I installed new senders in both and no go

I really need some guidance on this. My oil pressure gauge will start out with showing pressure then gradually goes to zero. Me temp gauge will not work. I have up graded to the rt-engineering IVR. When I ground the wires to the oil sender and to the coolant senor the gauges with go to hight...

Yes Sir was just showing what the part number was out of the parts book and what the spring associated with that number looked like. Very familiar with Megaparts as I have ordered from them for my 68 Charger back on the road project. Thank you

I need to paint some Rallye wheels. Where would be the best place to get Rallye wheel paint? Ty