Search results for query: *

thanks to all of your help we got the inside front of the heater box out. it was way worse than the charger vid i posted. the core looks very bad and the h pipe doesnt look too good either. for us this will cost too much to replace . we dont care about the ac and have decided to put a vintage...

while working on other stuff today the wagon started leaking antifreeze badly under the dash. we looped it for now but can any of you give us any direction to a writeup or something to remove it? i cant seem to find very much info on this. its got ac too but its not hooked up and we dont care...

1967 coronet 440 station wagon w 318. we changed the voltage regulator to a solid state one along with a new alt and all new headlites and bulbs(not led) we were having trouble with the stock temp gage and decided to put an old school triple gage set in for the nostalgic look and to make sure it...

while playing with the fusebox on my 67 coronet wagon i noticed a black loose wire hanging in that area. it seems to be going into the headlight switch. it has no terminal or plug on the end and it seems to only be long enough to go to the fusebox. it possibly broke off in the box while i was...

ive been having trouble with my fuel and temp sender. i dont know the history because this car is kinda new to me. i was getting the pulse at the temp sender but after playing with the fuse box it stopped. i figured i disturbed a wire somehow. the gas sender wire always has the pulse even though...

how is this held in? mine is loose and i can pull it right out easilly. i see it has threads on it . is there a big nut on it thats missing?

while trying to find out the problem with my gas gage i recently filled it up to check the needle. it all points to the sender and with all of your help ive located a sender for my wagon which seems to be the same as any b body. how much gas do i need to get out before removing the sender. ill...

some people are telling me its the same as a sedan tank .it has that round shape in it for the spare even though its stored in the passenger side vertically. does anyone have access to a parts catalog to see if the senders are the same for the wagon or the car? i would really appreciate it. ive...

mine hasnt worked since we got the car.it seemed to intermittently work but now ive got nothing. i pulled the wire from the sending unit in the intake and with a test light it was pulsing. i assumed it was just the sender so i pulled one from my 67 barracuda and still got nothing. i tested the...

where should i buy a fuel sending unit from for my 67 coronet wagon?most places i see say fits all except wagon.i pulled the sender wire from it and with a test light it blinks so i think the wiring is ok.it never reads much more than 1/4.i also touched i ground directly from the batt to the...

my fusebox is hanging by the wires under the dash.the screw to hold it up is missing. can i buy this locally? is it a certain thread size or is it a sheetmetal screw?

Many of you have heped me greatly with this since ive aquired it and i thank you so much. I have 2 questions i hope you can help me with though. The v8 emblems were missing on the front fenders.i found a set with the nuts. I was able to get the nuts on the driver side within the door gap but...

how is this attached? mine is missing and ive acquired a new frame but would rather just put the pivot arm on my new one if possible

how is this held in place?they seem to have screws deep in the center but what about where it meets the fender and hood? both sides on mine are loose. are there clips i can buy?

i already have the superbright bulbs.i thought i could do it without removing the cluster but my fat ands make it impossible. can i just tilt the cluster forward without removing the wires? if i did take the cluster out which terminald would i apply power and ground to to make sure the lights...

mine is missing both kick panels in the front. there is a big round hole behind it that seems to go to the outside. while i search for kickpanels should i be searching for something else too to cover these holes? can i just block them off?

my car is missing the upper hardware that attaches the vent window .there is just a taped over hole in the glass.its missing the arm and whatever went in the hole in the glass. can i buy these parts? how does the little arm attach up at the top?

i want to buy all new.autozone and sylvania list the same numbers for my car H6024 for low H5001 for high one seems to be a larger diameter than the other. i think both of mine are the same size. also the ones in the car have 3 prongs but only one uses a 3 prong plug. the other has 2 but it...

all of my lights are dim and flicker slightly untill i rev it a bit higher. i replaced the alt with a high amp one i put a new voltage regulator on and sanded the body where it sits for better ground,ran a heavy hot wire from the alt hot to the hot on the starter relay to help reduce the load...

i ordered a new one from autozone but it said with ac..... mine had ac but doesnt now. think this is a problem? whats the difference?