Search results for query: *

Oh and don't forget the wiring loom clip before snugging everything up

Few tips for those poor souls who have to endure this agony. Background: 70 GTX 4spd Doing a front disc conversion(Baer) Got a new Dual Diaphragm booster,pivot link and mount plate from PirateJack. Here's the tips. Drop steering column, remove inst cluster at least pull it away. After removing...

M&H answered my question. Their connector connects to the tach lead that passes thru the firewall(grey plug in my picture). Grey blk stripe wire is the tach signal. Black yellow stripe is signal wire to ECU.

70 GTX 440 4spd. I purchased a new engine wiring harness thru Year one(M&H Harness). It was built with the electronic ignition modification. Which incorporates a 4 pole ballast resistor and 4 pin socket for the ECU. Added into the harness is a new plug up by the firewall junction. It is one...

Lots of great suggestions and pics. Thank you all. I purchased a new engine harness thru YearOne that was modified for Electronic Ign. A new distributor and coil were also purchased. SInce I didn't want to extend or modify the new harness I was trying to keep it up on the firewall. right of...

As the title states I'm adding electronic ignition to a 70 GTX 440 4bbl. I would like to mount the new component(s) in the correct spot(s).New wiring harness is installed. Ballast resistor and ECU need mounted. Can someone explain or post a pic of where they mount? TIA

my Legendary caps are the snap in 1" tall. Originals that were on the original 500's on the car had the inner piece with 5 tabs. I'll give Maryland Mustang a call and see what they have

Thanks Don. Are those OE centercaps or are they made by Drake/Legendary? I tried using the OE caps with these wheels but the inside portion doesn't protrude far enough outward to engage the Bolts or alignment dowels.

Installing Baer brakes SS+4 11" front discs. Fit is good & install is pretty straight forward. Now installing a set of Legendary 15" Magnum 500's. Issue is the center cap for the spindle(Baer spindle & cap) won't allow the legendary wheel center cap to go on. Anyone found a solution or even...

Thank you.

Sorry My bad. 1964 cushman scooter. No seriously a 70 GTX

Thanks it's been a decade or two since I hit DVAP. Last time I went Mr Hoctor wanted gold for a few pieces of tin.

Looking to see if there's a source for the parking brake handle spring retainer.For lack of a better name. Or maybe someone has a creative "fix" screwdriver is pointing to the plastic retainer that is broken

Thanks CKessel. Good article with valuable info. I'll have to check the booster to see if its a dual diaphragm or single.

I'm in the process of upgrading the power drum brakes on a 70 GTX. Putting Discs up front. Leaving the 11"drums in the rear. I can't seem to find a definitive answer to"Do I need a new master cyl and Prop valve?.None of the brake conversion packages that are being sold come with a master or prop...