Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just finished up a low deck build and tried the Mancini . we found too many variances in it. Stick with the factory retainer. We used it with Fel pro 40240 gasket set and installed as dvw posted and you will have best chance of no leaks. Best
This would be a guess. 3.23 and limited slip but that was 6 yrs ago.
I torched the motor and can't remember if it's a limited slip or not.
I will look through the center section serial# and update.
Thoughts?? Thanks
Sale - AMD fuel tank for 69 Coronet/Super Bee. New with a small dent that is visible when mounted.
125.00 Located in Lancaster,Pa. Pick up only. Thanks
Sale- Comp cams and lifters.
Cam- Hyd flat tappet 145-1228 adv dur 285/297 dur @.050 241/247 Lift.545/.545
Lifters- Comp pro magnum hyd lifters. New old stock. 300.00 for the pair. Located in Lancaster, Pa
Thanks
Sale- Auto twirler body cart. In good shape with overspray and some media grit in wheels.
Set up for B body. Complete with hardware and brackets.
300.00 in Lancaster, Pa . Thanks
Sale- Right front fender for 69 Coronet/ Super Bee.
The fender is going to need a good bit of work .
All the usual suspects . Dents and some spot rust.
Price- 350.00 . Local pick up in Lancaster, PA Thanks
What is the process of swaging the door end seal to the door weather strip?
Installing the OER door seals with the hinge side end seal already attached.
Thanks
I am running eddy victor 440 heads on my 512 set up. They have been a real pain as the finish machining on valves and valve guides were both out of spec. Please check with your builder about these conditions. best wishes on your project.
Thanks for the input. The motor we pulled from my 65 coronet and hoped to do the top end but on teardown found 2 different head castings on the motor witch made us want to tear the rest apart. Good we did as we found 2 lightly scored cylinders from crap KB cast pistons. Also block is .55 over...