Search results for query: *

BTW - seeing the QTR you were provided is one reason I am only splicing the QTR bottoms. I'm noticing none of the replacement sheet metal I purchased for the back of my RR is creased very sharp at he corners. Looks like it was done in a vise versus a press. Everything is rounded. If you...

Nice work. i have to do my left outer with the qtr on. Like the partial idea way better. Won't get to it till I get the trunk floor, drops and tail light panel in and welded in place. lots of work but hope it comes out as nice as yours.

My 68 was silver and original paint in the jambs. This was off a parts car.

Its original paint but will need repainting. It's been stored in a parts truck for the last 3 decades. That is where I got it here in Dallas.

I have a Big Block (361, 383, 400) factory cast iron AC support bracket goes between intake manifold to support the OEM V twin compressor. Cleaning out garage, will be bead blasted and painted black , ready for use. Came off a 383. Price is $40.00 Will ship on your dime from Dallas Texas area.

I bought this grille and filler panel to retro fit a 69 front-end on my 68 RR. Later decided I would keep the 68 parts so I'm selling this setup complete. Will need to black out resprayed (its 52 years old OEM product). I'm in Dallas Texas area and will ship on your dime. $350 for all.

I bought a set of Ridler 18 inch wheels for my old Chrysler (61) but decided it didn't look right on the car. They resemble the Magnum 500 with the windows painted black. and have decent Michelin radials. Guy had them on a 68 GTX but took them off for a set of steel wheels (A12 look). They...

Its far from the worst I've seen used. There is surface rust on the carrier, suppose that doesn't meet your qualifications. Go find a better one. When I was looking 3 years ago, I spent over 2 grand on all new Yukon 489 housing, Eaton Posi, bearings, solid spacer, ring and pinion, setting it...

I have a brand New Mopar 6.4 Crate Hemi Swap Engine Harness, ECU/PCM, Extra plug for jumper to Power Distribution Center, Throttle pedal and O2 sensors. Was going down this path then my "Expert" that was going to help me bailed. Now I bought the OEM Crate Hemi stand alone setup. All this is...

I have a good 489 8.75 center section complete with 3.23 rear gears (non-posi) for sale. Includes a 1350 yoke and pinion snubber. These are heavy so shipping is probably as much as the part. $250 in N Texas.

I have an extra 68/69 Road Runner, GTX or Satellite lower valance for sale. Price is $100.00 in N Texas.

I have an extra 69 Road Runner Grille and (L&R) headlight surrounds for sale. Price is $250 and I'm in N Texas. I'll add pictures tonight.

I have an extra set of 69 Roadrunner, GTX or Satellite rear taillights (L&R) for sale. All the mounting studs are there. Comes with Lenses, Housing and Bezels. $200.00 in North TX.

I bought some extra parts for my Roadrunner build. Now clearing out the shed. Front and Rear Roadrunner, GTX or Satellite bumpers. Both straight but have a couple small dings. The rear has the bumper brackets. $300 for both in N Texas.

Cool old car, some of my other group have 60-62 Chrysler wagons with the fins and a tailgate.

I'm using a set of Toyota Solara power front buckets on my 68 RR build. They have moderate bolsters and the passenger goes forward when you put the seatback all the way up. I had mine upholstered in the white Pearl for my 68 RR project. They match the Legendary rear seat covers I found for...

You're brave, to do black on a car that wasn't in decent shape takes a long time and lots of body work and block sanding. These cars have such long flat panels. I did my 68 Charger in Sunfire Yellow. That one body line that goes from front to back took months of perfecting to get straight...

Might have to start looking at CR again. I got a body cart for a 70 Nova and modified it to fit a 2nd Gen Camaro but it cost me 300 for the initial setup. It still wasn't a rotisserie.

Nice job on the floors, not easy to do right. I'm moving my battery to the trunk after I put the full trunk floor, drops, tail light panel and qtr. bottoms on. My 6.4 TR6060 swap will need a place for the cold air and filter to live. Putting the factory 2020 Scat Pack MAF/Tube and filter unit...