• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Tony Tee

    Bought a Daytona...$400.00

    APRIL FOOLS!
  2. Tony Tee

    HV oil pump bolts kit disappointment.

    I finally got the chance and bought some longer bolts. Plus I noticed that the short bolts were grade 5 while the long bolt was a grade 8. Not a good bolt kit . Thanks everyone for your help. Sincerely, Tony.
  3. Tony Tee

    Drill Press?

    I bought a ENCO. mill drill many years ago when they were still in business. Drove to Atlanta GA. To pick it up. Best tool purchase I ever made. Super handy. My old drill press is collecting dust. Get one if you can. You won't regret it.
  4. Tony Tee

    Center links with intentional bends in them?

    I bought a used centerlink. At a swap meet for cheap, because it was bent. And I straightened it out on my cheesy hydraulic press. It wasn't at all difficult to straighten. In other words, easy!
  5. Tony Tee

    HV oil pump bolts kit disappointment.

    I just found out that 440 sorce has high strength bolt kit for the m63hv pump ( pictured ) with all 4 bolts extending out of the pump equally. They have 12 point bolt kits for the HV pumps as well, but not shown installed into the pump. Not all bolt kits are created equal .
  6. Tony Tee

    HV oil pump bolts kit disappointment.

    I appreciate the comments. Thanks!
  7. Tony Tee

    HV oil pump bolts kit disappointment.

    I'll look for grade 8 bolts. It just seems incorrect that the standard pump has all for bolts going into the block 5/8 " deep. And the hv bolt kit has only the long bolt going into the block 5/8" deep and the other 3 bolts go in at 5/16" I understand what you and others are saying. About having...
  8. Tony Tee

    HV oil pump bolts kit disappointment.

    I said that in my initial post. But thanks anyway.
  9. Tony Tee

    What did you do to your Mopar today?

    I pressure washed the grey plastidip coating off the magnum as it had petrified in 10 years time into a rock hard coating. And unfortunately revealed some bad rust repairs.
  10. Tony Tee

    HV oil pump bolts kit disappointment.

    Hindsight is 20/20 I wish I was warned before I ordered this kit.
  11. Tony Tee

    HV oil pump bolts kit disappointment.

    Sorry I don't believe only one long bolt is needed. As all 4 bolts on the standard pump are all the same length into the block. And even if it supposed to be ok with only one long bolt. I'm not doing it. Remember! the standard pumps bolts are the same length into the block.
  12. Tony Tee

    HV oil pump bolts kit disappointment.

    Then these kits are not needed? And why didn't chrysler use shorter bolts from the factory? They could have saved millions buying shorter bolts for all the big blocks they produced! Maybe they should have shortened every bolt on every vehicle produced? But they didn't ! and this kit is...
  13. Tony Tee

    HV oil pump bolts kit disappointment.

    This isn't a big deal, but it's more trouble than it's worth. And I'm letting others know before anyone else buys this kit from Mega parts. I ordered a extended bolt kit for a big block hv oil pump on ebay from Mega parts. And 3 of the 4 main body bolts are short. It also comes with 2 small...
  14. Tony Tee

    Need opinions with Dakota fuel pump purchase...

    I used a semi rigid translucent hose .5" diameter to drain my tank . Mine has the big tank as well. I thought it was going to be a terrible job to replace the pump. But it wasn't too difficult. Good luck.
  15. Tony Tee

    Need opinions with Dakota fuel pump purchase...

    I got the cheapest one locally for my 2000 x-cab sport 4x4 and it makes noise the gas gauge read empty with 10 gallons left in the tank. But it pumps gas! Next time I'll spend more and get a better one.
  16. Tony Tee

    water outlet

    Captain cheapskate here! $50 - $100 to replace a perfectly good oem housing and paper gasket for a two piece housing and a o-ring ??? No disrespect. But why?
  17. Tony Tee

    Hot running 440 60" over

    Get a cheap infrared non contact thermometer and see what kind of Temps you have at the top and bottom of the radiator and everywhere else. Don't guess. Analyze.
  18. Tony Tee

    Mystery hole in the Wall(Firewall)!

    YOU! YES YOU! YOU BEHIND THE FENCE THERE! STAND STILL LADDY! LOL!
  19. Tony Tee

    Classic car prices !

    Mopars are increasingly gaining more value. Saw this on YouTube today.
Back
Top