Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Interesting to me, whenever I start the 1970 Coronet 500 project. I think it has buckets and a buddy seat like mine. Other projects ahead of it. The profits off the 66 Corvette will go into other projects.
This is a 62 Dart -- 440 motor -- TTI headers -- After market tilt steering column, which is a different connector configuration from the column to the steering box. -- If the Borgeson unit has the shaft connection in the same location as the Mopar box, then it should be simple to hook up. --...
Hey transmission experts, I have my 727 apart after the torque converter failed, cleaning it up, putting in new frictions and seals, and a TF2 shift kit.
The shift kit came with a blank orifice plug for the front clutch feed in the case, no hole in it. Should I start with a small .080 or so hole...
Just some info on if you going the aluminum head route I think the only two heads that come with straight spark holes are the Stealth heads and the E Street 84 CC Edelbrock heads the rest come with the angled plugs which might or might not work in your application.
383/auto with buckets and a console. Has airgrabber hood as well as the numbers matching block and trans. No fender tag but a very nice build sheet. Has a good bit of rust but major of the hard to find parts are there. Located in Lebanon, TN and priced at $7500. Will not even consider parting...
First generation Trex was a ******* disaster. Got about 10 years out of it, but was a chore to keep it clean. Replaced it about 8 years ago with a Lowes brand. Allot better. Make sure the coating goes all around the sides and groves or moss will build up. Also the dark brown boards we went with...
I did do a hot water wash first so may have flushed off some of the loose stuff (mostly in the fuel bowl area) but I did not get a huge amount of residue as sediment. I will say the ChemDip solution is much darker now so very fine particulate definitely clouded the cleaning solution but I did...
Engine is in a 1963 Dodge Phoenix, which is an Australian assembled Dodge 440. The motor sits much closer to the right side which I think is pretty standard for all models to allow for left hand drive steering. Aus Phoenix is right hand drive but motor sits in the same position in engine bay