Search results for query: *

FOR SALE DM for questions and to set up shipping or local pickup. Part located in New Orleans, LA THANKS.

Just did the test and you were right! Battery began charging. I will return the new alterbator and get a new voltage regulator. Are those ones on amazon any good? Or should I spring for the Blue Streak one? It's around $50. Thanks again Bob. And yes I picked up a shop manual a while back I...

Bob, that being said I'm interested to know about rebuilding an alternator if I can do it at home. I can always send the new alternator back whenever it arrives in the mail. Thanks

I grounded the field wiring coming from the voltage regulator at the negative post of the battery via a jumper wire and the alternator still failed to charge. My understanding is that the voltage regulator is essentially a switch that "opens" or creates a ground when the battery power drops...

Thanks for the reply. Yeah a dual pot may have been the way to go in hindsight. I am going to be moving soon and may have to put the car up for sale, so I didn't want to get too in the weeds. Good tip. I will check frequently, along with all the other checks that I do obsessively! Have a good one!

It remains at 12.4. when the rpms increase.

Yeah I tested with a meter and I have battery voltage on the ignition side of the voltage regulator and no power at the field terminal on the alternator when key is in on position. I am no expert either but it leads me to believe it is a faulty voltage regulator. Thanks for the tip. I am try...

I have battery voltage at the positive terminal of the alternator however when I have the key in the on position I do not have any voltage at the field wire from the external voltage regulator. Does this indicate that it is just my voltage regulator? Hoping so because they are much cheaper than...

Yes! Great. I guess it IS a reman. Thanks

Hello All, Doing my first alternator change. Never done one before on these old mopars. Current setup is a single pulley alternator with no belt tensioner. I am not able to find the exact stock one and I am considering buying new from rockauto. The amp rating I am seeing on new is 60amps...

Old Master Cylinder

Mission Accomplished. The extentions, uni adapters, and deep sockets did the job. 13mm. The old MC was in terrible shape and should not have been sold to me as is, very unsafe. I got the car from a shop in Ohio who said they had just done a "full brake job". They did put on new drums but didn't...

Ohhh lord what a dooozey! Going to give it another go this afternoon. I will report back. Thinking a seat removal may be the right call. Thanks everyone!

I have heard this point/argument made as well. I would be interested to hear the arguments on both sides. I am keeping this car 100% stock, so for me it is less about better or worse, but about restoration.

Thanks for the specs! Will do.

Will do. Thanks

You would go for the bolts connected to the master cylinder on the back? It's a tough spot to get to.

Hello All, Noticed a small leak on the back side of the master cylinder on the 64 Fury. Needs replacing. Failed getting it off this afternoon, could use some advice.. Because the master cylinder nut access is in the cab under the steering colum behind the pedals and impossible to access (see...

$200 OR BEST OFFER PM me for shipping info Passenger Side Stripped and ready to go

Thanks for the picture. Nice setup.