Search results for query: *

welcome to. Bbo

Do you mean the noodle on the edge of the rear hood lip? Are you saying you use the noodle to set gap? Or to protect cowel? What type of windshield issue are you referring to? Thanks

Bears beat the Packers today for the first time in a million years Well deserved hibernation

You hear a miss? I pulled each while running and noticed no difference. I will try again.

I use Emu Oil. (actually it's a cream)

Penetrates well Pricey also

Happy new years :thankyou:

IMO it sounds like a collapsed lifter.... Try and use a PVC pipe from the valve cover to your ear and slowly move down the valve cover should help you find it...

C'mon @Cranky We want to see results!

For sure lifter noise. Should be easy to find with the cover off and running. Might be a cam lobe on its way out.

I ran the stage 6 with a 300 nitrous hit. Ran them for a few years and zero issues with the 1009 gaskets. Of course I made sure they were not into the chamber. There was some discussions about detonation and the ones with close proximity to the bore might of contributed to the failures.

Has anyone used Delta https://www.deltalights.com/classic-5-3-4-halo-high-beam-led-headlight-kit/p12headlights ,for upgraded LED headlights with Halo and Switchback option? I am looking at using them in a 67 Coronet RT so if anyone is familiar with this company feedback would be appreciated.

The engine miss and ticking are related it sounds. Loosten the plug wires from the cap and carefully pull them off one by one to see which cylinder it is then diagnose from there. Pull the plug for that cylinder, do a compression test and pull the valve cover to check the rockers and pushrods...

Bob, To be clear, I was referring to Mr. Attwood at Dead Dodge Garage who posted the mentioned “Shunt wire” video. Promoting this direct battery to alternator parallel approach as making this system safer, apparently not understanding how the paralleled fusible links, or in some cases with no...

I bought it new off the showroom floor. The dealer probably added the aftermarket moulding. I tracked down the supplier awhile ago. Rear Window Graphics | Body Side Molding | Truck Graphics | Car Spoilers in San Diego, CA

Took delivery of a GearVendors O.D. for my 67 Coronet just after Thanksgiving. Was suffering from hip pain, now I can barely walk with a cane, looking at a hip replacement in February. Guess it will have to wait.

Still for sale

Hello! I have been trying to diagnose this noise before embarking on removing the lifters. Link to Video open to all recommendations or ideas before I start pulling lifters/ deeper disassembly. This is my first old school engine, so take it easy on me. Symptoms: 1. First time I noticed this...