Search results for query: *

For a comparison. A smaller rattler cam 281*/289* @006” 227*/235*@ .050” .480” ish lift 109* LSA 67* of overlap Will pump 154-165 lbs of compression with the compression dropped to 9.3 The Bullet cam I mentioned has the same overlap, 67* if it is ground on 114LSA. It pumps 165-175 lbs of...

Thank you all for the replies. Got it. No guides to bang out. Check side play, if too much off to the machine shop and get bigger shaft valves. At the moment I am in take it apart mode. About 50,000 miles. 318 was running good. But need a bit more power. Camper van weighs 6600 loaded. Any...

I would say cost versus reward, Are you getting more rent because you have hardwood versus Vinyl plank? Every renter is going to have kids or dogs or have friends that have them. And as other people stated, Really don't care. I had renters have a party and campfire in the middle of a living room...

Seen on ebay CAP carbs for 67 don't remember number. 4343s was non CAP 67 carb.

Welcome aboard from Ohio.

I'll add, I don't use 'um. Fair weather cars.

Gasket is the same, if you go with a Felpro, get a rubber cork one at any auto store. If it has a factory windage tray, you will need two of them.

Hydraulic flat tappet

Hi, as requested ..

Welcome, great looking charger.

Well the block doesn't change so you can buy any gasket you're comfortable with. I'd avoid cork like the plague though!

Welcome from the central coast of Cal.

That's pretty crusty for a California car.

Hadn’t thought of that although I doubt I would ever smoke it. Maybe just once as a tribute.

When we built our home 10+ years ago, we chose pre-finished hickory. Installed throughout the home with the exception of the master bath, laundry room and entry hall. Since we have dogs, hickory, being one of the hardest woods available was the choice for durability. It has stood up extremely...

The fire in Pacific Palisades sounds like it is in the vicinity of the Malibu Cruise. Topanga, Mulholland all involved with the devastating fire. Air drops suspended due to high winds. Poor Bastards. Pray for them.

Maybe I missed it. Are you looking at flat tappet cams or rollers?

You have to make up your own mind on this. For me I ended up buying my Viper instead, mint, no work needed, shiny, working A/C etc. and it was in the $45kUSA range when I bought it. An old car will never make sense, you just have to like it enough to spend the cash. I enjoy driving my cars and...

I wish!! At least it would have a stabbin cabin then! :rofl:

I have 69 SupeBee, 440 motor (not original), not sure of the year. I attached a picture of the oil pan. With a variety of oil pans possible, how do i know which fel-pro gasket to buy?