Search results for query: *

I have a set of coil springs for Viking coil over shocks, Viking part number 12DP200 12” free length shock with a 200lb spring rate. Can be used with the following Viking coilover part numbers c209 and c209 for crusader seekers replace the 2 with a 3. These were used during mock up and have...

I need to order coil over shocks for my triangulated 4 link, am I correct in thinking that I should let the suspension hang then measure the distance between the upper and lower mounting points and then add a couple inches? It is an RMS 4 link where the shocks sit in front of the axle and...

Gentlemen, Wondering do I need the adjustable prop valve with 4 wheel disc setup? I have the wilwood valve already but not sure that I need it? if I don’t need it do I still need to install distribution block or do i run the lines straight from MC to the “T” on the rear end. Wilwood disc all...

does anyone know where I can get 7/16x20 inverted flare hardline brake fittings? I'm having trouble finding that size it seems all I see close to it is 7/16x24. Thanks

Got my 4 link installed, all is well except it seems the rear end is sitting real deep in the car, car would ride very low. I had to use a spring compressor to get the coils on the shock with the shock fully extended which I assumed was normal since the instructions said that might be necessary...

Wondering if anyone has modified a traingulated 4 link to help with launch while drag racing. As my build has progressed, so has the power my new motor is going to make, I have the Reilly Motorsport street lynx system. I plan on adding a sway bar which should help but I was also thinking maybe...

Ok guys getting ready to set the torsion bars back in and it seems like they are twisted, the lines in the front are straight up and down and the 2 in the rear are both angled can someone tell me if this is ok to use or should I replace them.

Wondering if anyone has installed a sway bar with a triangulated 4 link, i got mine from reilly motorsports while i have an email out to them asking i figured id post here and see what you guys have done. Frist time installing a 4 link or sway bar so i just want to make sure im prepared with...

Anyone running the lowers from qa1? Debating grabbing a set wondering if it's worth the money. Thanks

hey guys, does anyone know where I can buy new pivot shafts that come WITH the new metal bushing sleeve?? Everywhere I seen it says to reuse the old one, unfortunately I destroyed one during disassembly. Seen the hotchkis on summit but I don't see the sleeve pictured Thanks

Ok guys, I'm installing the poly front end rebuild kit from PST on my 67, when I was installing the strut rod bushings i noticed the sleeve is really tight. The strut rod itself is tapered underneath the threads and the sleeve stops there. I mic'd it and the difference is only .020 but it seems...

Hey guys quick question, Got my torque boxes from us car tool today was wondering if I should wait until I have the driveline back in the car to install them or am I good to weld them in now? I know with the frame connectors you want to have the motor and trans in so I'm waiting on those

Hey guys, can someone point me in the right direction for mopar green bearings... I bought my wilwood rear disc brakes and it says designed for use with mopar green bearings, not sure wtf that is...

Hey guys, Just ordered a set of global west subframe connectors wondering if anyone's running these, they look nice and have good reviews,they are the tubular style. Also if anyone wants to give me any tips for installing this is my first time installing connectors. Thank you

Can someone recommend a four link set up for a 67 coronet? I've been searching insee ride tech offers a kit but it's for 68-70 b body, would I be able to use this?