Search results for query: *

Good afternoon from sunny Auckland. Got any pictures of said RR? :xscuseless: Welcome to FBBO. :thumbsup:

And now she’s got MS.

Yes he will.

Hi, New here I own 68 Roadrunner. Steve

I don't know if that side body stripe is original to the car (never seen one), but it looks good on it. Clean looking engine bay too.

When I complete an A/C box resto I have a small electric vacuum pump (or you can use any source of constant vacuum) that I use to hook up the switches and actuate all the doors and make my adjustments according to the FSM

Not sure, but here are the specs Dual Valve Spring Set w/Damper OD 1.005/1.530 in. ID 0.725/1.110 in. Seat Pres. 185lbs at 1.875in. Open Pres. 465lbs at 1.225in. Rate Per Inch 430

I was a troubleshooter in the Elevator Industry in NYC for 43 years and worked with prints every day. That is an excellent schematic. Sorry for sidetracking, but let's give credit where credit is due.

Or…look for a “split frame” that allows two 3” cone speakers to fit the factory hole

Don’t freak out. Look for something (like the door seal) preventing the door from closing. If that doesn’t work…Mark where the striker on the door is now (pencil), loosen big Phillips screws and move the striker outwards 1/8”-1/4”.

Those BBF's are a pretty good engine, I would tweak it a bit as well. I always remember the garage where I worked tuning up a 70 Police Interceptor 429, cylinder pressure checked in at just above 200!

Found this. Gluing lower dash pad Also would think windshield urethane would be extremely durable.

excellent choices!

7 months previous I just graduated from University of Illinois. Landed my first full time job working in a quality control lab straight midnight shift 10pm to 6 am. Relieving shift could not make it in so I worked another 8 to cover. Can remember it very well. '77-'78 was no prize either.

Manual steering box, removed about 30 years ago from a 69 Charger with about 65K miles. Been under the workbench ever since. Needs a new home. Very nice condition with perfect splines on both shafts. $150 plus shipping from Phoenix Az. Money orders or personal checks NO PAYPAL. Been in this...

Home | S&M Electro-Tech Thanks Gripper

Even if you have a broadcast sheet for a Lynch Road car... you can't get the tag correct! ( unless you have the original)

Give me a Craig Power Play! Did I spell that right:lol: