Search results for query: *

Hi, Looking for used Original Wheel Studs / Lugs for 69 Charger 11" x 3 " Drum & Hub for the Right Side with the "R" stamped in the end. Need 5 Good ones. Thank you!

Hi, I just bought aftermarket wheel cylinders from Craig. Very easy to work with!!! I also wanted a second pair of OE cylinders to rebuild for an OE Restoration.

Thank you i understand and absolutely up to you if you want to split up the pieces

Actually they are the rear brake wheel cylinders… same star wheel adjusters for both front and back if your willing to give up those

Update on my post, . I ended up checking my wheel cylinders for leaks after a suggestion and sure enough they where leaking with rust. I changed all 4 wheel cylinders, all hoses plus MC for good measure and purged all the old fluid. Bleed and adjusted and they seem fine now. What an ordeal...

Hi, I´m looking for the following parts: Set of Wheel Cylinders part number 2881606 with casting numbers 2881613 Need to be re-buildable cores. Also looking for a set of original "Manual" Star wheel brake adjusters for 11"HD Drums that I can also refurbish. Thank you!

Hi, I cant tell from the pic but do you have Manual star wheel brake adjusters for 11" HD Drums? Also looking for original Wheel Cylinders casting 2881613 if you have them. Thank you!

Thank you!!

Awesome thank you!!!! Changing my MC and realized it was only held in by the rebuild tab….. want to do the new one right. Can I pay you PayPal or check by mail? Robert Laurelli 131 Fox Ridge Dr Cranston, RI 02921 401-497-5118

Thank you for Looking. I would take the retainer if it isn't too pitted. I do already have that casting for an MC. I was hoping for a 2660809 casting but thank you for the pic. How much for the retainer?

Thanks for the response. Bolts are the larger 7/16 -20. Not sure on the bore size but a standard replacement is listed as .9375 ". Do you know which one is correct for my 11" HD Drums. I have a manual brake 11", four drum system on my stock 69 charger 440 R/T Auto Trans, 8 3/4 Suregrip.

Looking to understand what the difference in casting numbers was for rear drum brake wheels cylinders 2881613 vs 2881612. I have a 69 Charger R/T, Nov 68 build. Any idea which number is more correct for my application or are they both? Thank you!

Hi thank you. Please let me know what you find in your tool box… what casting master cylinder is that?

Anyone have a new or used Master Cylinder push rod retainer that bolts onto the back of the master cylinder. Looks like this pic I found on the web. Thank you! Thank you!

Backing plate does not look bent to me and previously took some material off of the spot in the plate and its still catching it.

Hi I just need one. I believe one of mine is bent because the drum is scraping in one spot on the backing plate.

Will take $150 plus shipping

WTB A DRUM BRAKE FRONT SPINDLE/KNUCKLE FOR A 69 CHARGER. PART # 1858084. I BELIEVE 62 - 70 ALL USED THE SAME SPINDLE/KNUCKLE. MUST BE STRAIGHT - ONLY NEED ONE PLEASE PM ME THANK YOU! ROB L. Here is a pic of one I wish I had......

Hi Thank you for the response. I have a dual pot master with front and back and no I did not see any fluid leak at any point. I was going to try cracking the MC brake lines to get any possible air out. I was also thinking of doing a fluid flush and replacing with new fluid as it has been a...

HI, Trying to figure out the procedure to remove just the brake pedal so I can change the bushings. Can it be done without removing the steering wheel or entire pedal assembly? Any help/tricks would be appreciated.