Search results for query: *

Hi all, I installed sound deading mat and new carpet in my '66. I found the seat belt mounting points. The problem is the driver's inside (tunnel) mount. It's the L shaped bracket, but the bolt does not catch on any threads. I tried a longer bold, no different. Is there a capture nut or...

Hi all, My '66 charger has factory AC and motor-home 440. All the AC parts are present except the compressor, mounting bracket, and I expect some pulleys/belt stuff. I'm good with a modern compressor like a sanden. Does anyone sell a mounting bracket or kit for this? Any suggestions are...

Hi all, When I drive in the rain or wash the car my right foot gets wet. The water could be bad windshield install or something with the cowl vent. Before I crawl up behind the dash, is there something that is known to leak? How do the cowl vent drains work and where do they drain to? Thanks

Now that I have a working HVAC blower, I'm getting noise when I run the blower. I thought it was a vacuum leak but I disconnected the hoses at the HVAC push buttons and it still make the noise. It seems to change when I switch to AC or heat or defrost. Is there some other electro/mechanical...

Hi all, My 1966 Charger with AC needed a new blower motor, so here are my notes. The old motor would only start spinning if I moved it by hand. There seem to 4 options that come up when searching for replacement blowers. One that is a can with long shafts on each end - clearly not correct...

Hi all, As headlights roll over they make sound like a rusty bushing or old rubber bushing, basically a long squeak sound. I can hear it over the engine idling. Is this typical or do I need to oil/grease some parts? Thanks

Hello all, I installed and RTE IVR3 and after about 15 to 30 min driving the gauges drop to zero, then move back to their correct position. This continues randomly. Overall the car has corrosion issues in the electrical. The gauges didn't work when I got the car. I think this was caused by...

Hi all, Thought I would share my experience installing new hood hinges. My right hinge pin was failing. I ordered these Auto Metal Direct Hood Hinges 310-1468-P Glad I got the pair since the left seem bent. I used some wood, clamp, and towels to hold the hood in place while I swapped each...