Search results for query: *

Hi everyone. Anyone used the AMF Parts panels? They have the 63-65 rear quarters I have been looking for. Just would like to hear feedback from anyone first before I buy anything. Thank you Leigh

Hi everyone, I am looking into moving a car from Burlington WI to Paramount CA. The quotes I am getting back are between $750 to $2800. Is there something I am missing here with the huge difference in price. Most of the quotes are $1000-1300. So, I am thinking this is around the regular price...

Hi guys, I am having trouble finding a full floor pan for a 63 Fury. Has anyone tried to use a 66-70 B Body or A Body pans. I know it will need to be modified but I'm almost out of options. Thanks Leigh

Hi, I am asking if all B Body front drum spindles are the same or different for different size Brakes. I have a Wilwood disc conversion kit 140-11020, but my 72 RR has disc brake spindles. My cheapest option is to find drum spindles. I can find my Mopar interchange manual to look it up. Regards...

Hi, I am rebuilding a 440 Magnum and would like some advice on parts. I have a 67 Coronet R/T with factory carb, intake, hp exhaust manifolds, 727 and 3.23 rear. The car is a used as a cruiser mainly. I plan to use a factory Magnum spec cam or similar for driveability and cruising, but I...

Hi all, I am thinking of using a electric water pump on my 440(street car), just for a different look. I was thinking of running the alternator fan belt straight to the crank pulley like the power steering set up. Now I am thinking the alternator will over rev due to a shorter route. Any...

Hi, can anyone tell me the compression drop I might have if I swap 915 heads for 906 heads? I have a 67 R/T with about 10:1 compression, I have a set of reconditioned 906 heads with the valve inserts for unleaded fuel I would like to use instead. Thanks

So the next question is about convertors. I just watched a video about convertor selection. They suggested to choose a stall speed 500 rpm above cam start range and that BBs stall roughly 300 rpm higher because of more torque produced. So if my cam start range is 2600rpm, I will choose a 3000...

I need some advice on the gear ratio to use in my car. I was thinking 3.5 to 1 for better highway driving but best to ask others who have been there and done it. Maybe 3.7 3.9? Here is my set up 72 Roadrunner 15 inch Rally wheels with 60 height tires 727 with 3000 stall 440 + 30...

Hi, I am after anyones opinion and experiences with using alloy rods in a street engine. I am building a street 440 that will be driven hard at times but not thrashed. Just a weekend driver that will last. The rods I had were discoloured and I was advised maybe look for others. After talking to...

Hi, any suggestions on camshaft selection for a 440 6 Pack. Does the six pack perform well with larger cams? I have a new 509 cam I was thinking of using. Thanks

Does the 1968-69 340, 383 and 440 4-Barrel unsilenced air cleaner take a 14' element? I have a RPM manifold on my 72 Roadrunner and have height issues. I still want to use a pie lid on my air cleaner and plan to use the air cleaner lid with pie lid and a drop base. Don't want to buy one and then...