Search results for query: *

The bare frame looks like this, I used 2" x 3 1/2" metal stock at the same angle as the K member. From steel to floor is 15 1/2" I used rubber cushions though to keep from scratching the paint... The cushions are 3/4" so in reality, I'm at 16 1/4" from the concrete. Cheers...

Dam, that’s too bad. Hate to loose another track. Kim.

I'm sure my '66 Satellite is in there. Gold.... owner: Halidman I'd imagine I have that issue somewhere in all my stuff.

A broadcast sheet doesn't give us any help on the distributor. We're you looking for something else?

Hey now... My thoughts applied to a lifelong career. Tore down and rebuilt a Ford 390 out of a '62 T-Bird. I was 14. Fixed it. Ràn perfect and sold the car.

I'll go out on a limb.....just tall enough so the brakes don't drag the pavement while attached to the K member? If you're looking for a measurement, I can have one for you in a few minutes....

Likely will put this together over the weekend. How tall should the uprights be? Thanks!

Thanks. Not much wire left to work with from the clock.

Nope.

By these photos above, I disagree. The lower photo looks to be darker overall as if a filter were used. The top photo has a more realistic yellow glow like you'd see in the California sun. Note the identical image except for the lack of glare on the bumper in the bottom photo, along with a bit...

You can Use front tire diameter to tailor your rollout and control your reaction times. I was finding myself on the late side of things recently, so I switched from 27.5” front runners to 26”, and that seemed to make about .015 difference in my RT’s.

:rofl:

A lot of components used in a certain vehicle manufacturers design are not the designs of the vehicle manufacturers themselves. Especially true when it comes to vehicle emissions control. Space claim during design meetings between different departments are held on a regular basis. The goal, to...

Mike Brady drove a pretty cool Cuda 'vert too if I remember...probably dang near new at the time.

I tell ya....I'd build a hotrod A-team van if I could find a good starter, complete with the under-seat gun cabinet they had!

One can never have enough nitrous oxide. :lol:

RAM charges an arm and a leg for their 2500 series trucks and they don't come with heated windshield washer nozzles?

Junk self ? Do you mean taking photos of your private parts with your phone ?

Moore OK is a big city ? Commere, Mech... lemme show ya a big city. :drinks:

New engines are tight, & can get hot veeeeeeeery quickly. To reduce that possibilty, adjust initial timing to 15-20* BTDC. The extra timing will help the engine run cooler. Good luck with the lifters....I would have used re-faced factory lifters.