• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. CornFlake

    Progress.

    Update.
  2. Part Stalker

    FOR SALE 1964 Dodge Certified Car Care Warranty Booklet

    I bought this in to get rid of and it promptly got buried. Looks like an original glovebox booklet covering scheduled maintenance and other random information. It has the 6 and 12 month sections filled in. I don't have a 64 Dodge, so I don't need it. It is in very nice shape for its age with...
  3. 6pktgo

    Clutch Safety Switch

    I pulled one off the shelf today ,for some close up side shots
  4. T

    Who has replaced a power steering box in a Hemi car with stock manifolds???

    I did it an Ebody, 71 Cuda, with stock ci manifolds 21/2" exhaust and dropped it from the bottom without moving any thing. I did replace it with a Borgeson box.
  5. S

    Header wraps

    I put a v8 into a car that overheated the open cockpit with the original 4 cylinder. The car came with no insulation and rubber mats on the floor. Wrapping the ram horn looking manifolds, I found water soaked header wrap lightly stretched went on nicely. Being an artist, I clamped with...
  6. mrmolding

    Picture of mount/nut behind splash shield

    Thanks again! Feel better! Ok. I got it. Tab is on fender. Thanks again!
  7. Kern Dog

    Who has replaced a power steering box in a Hemi car with stock manifolds???

    The only car that I've been able to remove a steering box from above is a car with a slant six. Every other one had to come out from underneath. The memory may be fuzzy on this but I'd think that as wide as a Hemi is, you'd have to rock the engine way over to make room to pull it from above.
  8. old guys rule

    Camshafts: All else being equal, what does an increase in LIFT have on performance?

    I recommend a power pro series titled how to build and modify Chevrolet small block V8 camshafts and valve trains. If you avoid the Chevrolet in the title it's a good read and will tell you all you need to know about camshafts and valve trains.
  9. R

    FOR SALE 1971-74 B body wiper linkage

    I just noticed that all the bushings are missing.
  10. Budnicks

    Your top 3 TV cars?

    I mentioned Hardcastle & McCormick Manta/Sterling 'Coyote' Porsche Powered on the 1st page I believe... In my personal picks... good pick :thumbsup:
  11. Don Frelier

    Header wraps

    Works well for cutting the heat Wrapping is pretty painful, but I was doing it when it was in the upper 80s.
  12. tom jaffeux

    Header wraps

    Who is wrapping their header? What are your results with the heat in the engine bay ?
  13. Nismobishi

    Need torque converter weights for 73 440 cast crank engine. Anyone know the specs?

    @Stormysmopars Above are the full size screenshots that you asked for. The chart is very helpful and you can make out the chart if you squint your eyes a little then you can match up those numbers to the location and weight size in the other diagrams. Unfortunately the copies I have on my phone...
  14. Dartn440

    FOR SALE 1968 Road Runner Hood Inserts

    Bought in a parts lot. Take offs at some point before being stored. Need full prep and paint. All mounting studs present. No engine call outs. Asking $250 plus ship from 28387. PayPal ok.
  15. dadsbee

    Picture of mount/nut behind splash shield

    Maybe it's just a bolt and not a stud / nut. I'll look next time I'm in the shop, day 18 of being sick.
  16. PRHeads

    Compcams CRB XE 268H -10 cam

    Poly, if you get a chance, post a picture of the cam card. It might help the next guy if they get to see what might be in the box.
  17. 6

    Picture of mount/nut behind splash shield

    Hope this helps…..
  18. QuickBpBp

    FOR SALE Original 1970 Road Runner/Gtx Rear hood insert

    Check your private message.
Back
Top