• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. halfafish

    The Meme not a Meme Thread Part DEUX

    Just #12 for me.
  2. BSB67

    Compcams CRB XE 268H -10 cam

    Measure the LSA. Then put the ICL where you want it. This stuff isn’t rocket science.
  3. 68-500

    383 quench

    What pistons do you have? 69 flat top or dish should both be near 0 deck.
  4. BeepBeepRR

    Need electrical advice for an electrically-challenged guy

    First off you said you have points. Secondly you have a electronic ignition box of the inner fender passenger side. Something seems weird. Im not sure if you can use an orange box with points. Someone will chime in with better knowledge. But here is a good place to start. Check out this diagram...
  5. Southbranch

    Farmer tries burning coal for the first time

    My experience with coal is living on Lake Hopatcong in 1974 my friend bought a snowmobile and we rode it to the Windlass Restaurant at the other end of the lake. I don't know the temp that day but 2 feet of ice it was cold, and no windshield or cowling made it colder. We were 14 years but a...
  6. S

    WTB WTB- Vent window chrome 65 Satellite convertible

    fixed listing, it had a small mistake, my fault.
  7. Nismobishi

    Need torque converter weights for 73 440 cast crank engine. Anyone know the specs?

    I'm assuming so. I can not remember where I snapped those screen shots from and I cant find them again. Luckily I'm a horder and save just about every picture that I find that has useful information in it lol! By the way, These pictures are ones that I gathered from here and other forums. They...
  8. Hemirunner

    70 Hemi Superbird Restoration..................errr.....scratch that........

    The engine bay is ready for primer. Hopefully I can get that done this weekend. I’ve been working on getting the rear window opening done and the area under the triangles looking right as well. Rear window trim needs a couple of spots welded and it’ll be ready for powdercoat.
  9. Kern Dog

    Who has NEVER had a cam or lifter go bad?

    Doing some bonehead type thinking, I tried to find common denominators in the cams that have failed and the ones that survived. Of the engines that I have had, only 2 of them had camshafts/lifters fail while I owned the car and engine. I have a 360 in a 67 Dart that was re-ringed in around...
  10. jimbosride

    Farmer tries burning coal for the first time

    There was a house here that the owner put in a new gas furnace but forgot to remove the oil fill tube to the basement in the house. The house was on a auto fuel delivery every fall. fuel oil in the basement and soaked into the concrete ....It was a old house and they had to tear it down.
  11. 6PKRTSE

    Who has replaced a power steering box in a Hemi car with stock manifolds???

    I have always removed the steering gear box out from the bottom.
  12. R

    68-70 Rallye vs. Non-Rallye Glove Box Door

    Not 1970, they are one year only. Rally and non.
  13. jimbosride

    Need electrical advice for an electrically-challenged guy

    Boy been there in my younger years.... I would start with the engine harness. Unplug it from the firewall, mark all ends then stretch it out on the bench and see where you are. If it's in real bad shape consider replacing it with a factory OEM Repop. There's allot of members here that can...
  14. 64BEL

    The Meme not a Meme Thread Part DEUX

    Remember having to type c: to open a file?
  15. Kern Dog

    Who has replaced a power steering box in a Hemi car with stock manifolds???

    I have been vindicated as shown by the Factory Service Manual.
  16. RJ Squirrel

    Car hauler trailer conversion

    Yes! A good way to dump the crapper is a must!
  17. 64BEL

    Quarter window decals yay or nay ?

    This was my 6 bbl air cleaner in my '70 GTX back around 1981. LOL
  18. cosgig

    Farmer tries burning coal for the first time

    The grainery in the next town north of me still has coal, and a lot of farmers in our area still burn a mix of wood and coal.
  19. oldbee

    Wow it's COLD out there! What about your spot?

    Correction for Akron, supposed to be -1 @4am. That’s cold enuf,thank you!
  20. RemCharger

    Wow it's COLD out there! What about your spot?

    Balmy-36/ -36 this morn
Back
Top