Search results for query: *

Welcome

This car is all original, just got it running after 35 years of sitting in a garage. 383, console with twin scoop hood. My question is why is there so many variations of the grille ? Which is the correct grille for a Super Bee ? Some have the Dodge emblem others have the bumble bee emblem...

I wonder what's on the fender tag. :rofl:

make the one sold at mecum is the fraud

Have stamp will travel..

45c yesterday in Perth

I saw this post and apparently either someone faked the block in the Super Bird or this is a fake block. The car does exist and was sold at Mecum as Numbers matching. https://www.mecum.com/lots/389751/1970-plymouth-superbird/ 1 of 308 V-code 4-speed Superbirds produced Estimated $65,000...

-32° Celsius or a balmy - 25.6° Fahrenheit for those metrically challenged like myself.

I would make sure the distributor is turning. Then I would clean the ground at the ecu. Then with a meter or test light make sure there is power at the coil positive with the key on and while cranking.

Just #12 for me.

Measure the LSA. Then put the ICL where you want it. This stuff isn’t rocket science.

What pistons do you have? 69 flat top or dish should both be near 0 deck.

First off you said you have points. Secondly you have a electronic ignition box of the inner fender passenger side. Something seems weird. Im not sure if you can use an orange box with points. Someone will chime in with better knowledge. But here is a good place to start. Check out this diagram...

My experience with coal is living on Lake Hopatcong in 1974 my friend bought a snowmobile and we rode it to the Windlass Restaurant at the other end of the lake. I don't know the temp that day but 2 feet of ice it was cold, and no windshield or cowling made it colder. We were 14 years but a...

fixed listing, it had a small mistake, my fault.

I'm assuming so. I can not remember where I snapped those screen shots from and I cant find them again. Luckily I'm a horder and save just about every picture that I find that has useful information in it lol! By the way, These pictures are ones that I gathered from here and other forums. They...

The engine bay is ready for primer. Hopefully I can get that done this weekend. I’ve been working on getting the rear window opening done and the area under the triangles looking right as well. Rear window trim needs a couple of spots welded and it’ll be ready for powdercoat.

Doing some bonehead type thinking, I tried to find common denominators in the cams that have failed and the ones that survived. Of the engines that I have had, only 2 of them had camshafts/lifters fail while I owned the car and engine. I have a 360 in a 67 Dart that was re-ringed in around...

There was a house here that the owner put in a new gas furnace but forgot to remove the oil fill tube to the basement in the house. The house was on a auto fuel delivery every fall. fuel oil in the basement and soaked into the concrete ....It was a old house and they had to tear it down.

I have always removed the steering gear box out from the bottom.