Search results for query: *

You should be sticking with a single brand. If you're painting this thing in your driveway, Omni is "good enough"

You're talking a couple thou at the outer ball joint !! And besides, who says that's going to move at all, he'd just be pulling one of the arms what looks to be about an 1/8th of an inch. You're splitting hairs here, at that rate he should have the chassis on a jig and make sure everything on...

Engine ?

The current one in my car was maybe 10? About a 700+ 440, but no machining, just old well used refurbished stuff . Knowing where the fancy parts are. Not a street motor whatsoever

5K is not going to do it. Take the time to itemize all the parts. Then figure what a shop is going to charge for the block work. By the time you add it up 10k is more realistic. You might ditch the motor home and look for a decent 67-72 440 from a car.

There use to be (maybe still is) a template set for porting mopar BB heads. Not sure how big a performance bump they would give. Maybe some of the FBBO guru's have experience with them.

Ontario Provincial Police. The picture sends shivers up my back! LOL

I have no idea anymore. My last build a couple years ago was $30k but it makes 1060 hp.

Realistic, I want to be around 5k, give or take another grand or grand .5. I can also if it needs more do the work in stages or save up more. If my stocks in tesla and Nvidia go up some more I might have a Lil more to drop on it. Where could I start for this, and am I completely unrealistic for...

Hi just want to verify the part number for the stock leaf springs I think its 2539-214 for 1969 383 roadrunner convertible also anyone know where I can get just the lower leaf spring with that number? other than junk yards. I know Vans sells only dana rear leafs

Eh, never ported heads before, I mean there is always a first time but I'm not trying to go through 5 sets before I get a good set. Not to mention I don't have a bench to test flow. If I do any work, it's either cleaning the casting up ala Uncle tony or taking it to a shop. With that cost in...

The never ending dream thread with 1 million different computations and budgets and ideas and workarounds to make maximum hp with least resistance and issues all while retaining every level of highest comparative performance against newest renderings of automotive engineering marvels and...

So no idea on cost. I originally built it in the early 90's and then toned it down for the street car. My ported 906's (ported myself) - had no idea what I was doing back then. In max race trim that motor was high 12:1 compression and went 10.92 @ 123 mph. Probably 3200 - 3300 lbs. When I...

I ran a couple quarts of 20w-50 and saw more metal on my magnet. No more for me. It was the same vr1 as the 10w-30 that was the other quarts. I thought it’d give some more hot weather protection, but I think it just robbed parts of oil on cold starts. My theory anyway.

Definition of crank it

All of the windows are now installed . . . The lookout is now completed ! ! ! Finally - got all the windows installed this past weekend . . . Love it ! ! The look of the silo lookout from the ground . . . really happy with the results ! This is a really tough picture to take in such a...

The tallest mountain found so far in the solar system is Rheasilvia, a large crater on the asteroid 'Vesta'. The peak in the center rises 22.5 km (14.0 miles) above the crater floor. Next up for tall mountains would be the volcano 'Olympus Mons', which is on the planet Mars. At 21.9 km (13.6...

Found this hiding on the table. It is a dash trim plate for a 63 Dodge with a manual transmission. It is in decent shape but does have some pitting and other flaws. Would be perfect for a pounder or redo to your liking. I would like $45 plus shipping from Puyallup WA.