Search results for query: *

0.88 for 383 cars 0.94 or 0.92 for hemi/hd , I’ve read both, someone will correct me if I’m wrong. As far as recommendations, I have a 68 GTX with the factory hd bars, tubular upper control arms for more caster which is really needed, boxed lower control arms, Bilstien shocks, and a steer and...

Balancing or making each rod and piston assembly is only the first step. After the assemblies are balanced then the crank must be balanced with those weights. Factory balance is done for the operating range of a stock engine, if you are running more rpm, better balance is a good thing. It is...

Well it’s cool as hell

Its a repop that I found.

How balanced were the pistons and rods from the factory, i see alot of people say they try to get there assembly within 2 grams of each other, i believe the new pistons out of the box would be pretty close to each other, if I am using the original rods how close were they, I plan on weighing the...

The impact I have doesn't make for a loose fit....but if you buy crap made in China, you might find ball joints that won't tighten up no matter what and can nearly be screwed on by hand. Ended up tack welding them after talking it over with the owner. I found out that was a somewhat common thing...

Temporarily, yep, it'll work

Cut the straight front part if the X. Easy peasy. I do quite a few custom X pipes since the EPA overstepped and closed down a few exhaust manufacturers

I was going to suggest checking with the FABO folks, but the OP already tried that route. [WANTED] - Small Block Left Side (driver) Exhaust Manifold 3418621

So what about the fan and the clutch? Which one should I buy?

I just appreciate anyone listening to me............ :lol:

67 gtx

I received free coupons for Clorox bleach after binge watching Joe Kenda, Homicide Hunter one weekend. :lol: Just kidding. Anyway, my wife's cellphone makes unsolicited suggestions much too often.

Someone did a re-purpose of a mopar transmission to make a gear reduction box.

Also any texts are "historical"...

So I wonder, how many alignment shops test drive the vehicles pre or post?

As mentioned in Post 10, your Smart TV's are just as guilty of the listening in, and watching also. When privacy is essential, secure your devices, in an isolated location, or remove the power source, AC/DC. The Old Saying "the Walls have Ears", is not a fairy tale...

I'm another one that will buy everything possible from Mega Parts. Customer service is second to none.