Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Probably ought to be decided quickly: whatever metal comes off is going to attack every bearing.
Had a near-twin to that many years ago; gold interior car with power windows that ran up & down like guillotines.
Last I heard, it's still in NorCal and being enjoyed.
Yeah it’s 30 over bore. anyone ever had valve reliefs put in there pistons do they make a jig and a specific bit to do that? I was wanting something in the 540ish lift just not sure about duration.
The factory rated compression ratios by Mopar are usually 1/2-1 point optimistic.
Your 67 with closed chamber heads was probably closer to 9.5 to 1.
Does it still have the standard bore 1967 pistons in it? If not, compression ratio could be anything.
For reference, we had a cast piston flat...
I just did this last summer, once you get started it'll be smooth sailing. The M&H harness are so nice and pretty self explanatory. I didn't remove windshield but did remove radio, I had steering column down and front bench seat removed.
Good used 1973 340 air cleaner. Good condition still wearing the factory sticker. Still has factory ribbed breather hose too. Getting hard to find and these are getting pricey once restored. This one is $175 and shipping
Parts are located in SE PA.
Can send more pictures if interested.
Pm here...
Good used 1972-73 340 trap door air cleaner. Good condition with some dings in the lid. Actuator works and the rest is in good original condition still wearing the factory sticker. Still has factory ribbed breather hose too. Getting hard to find and these are getting pricey once restored. This...
Thanks, the picture was actually unintended. I had just finished wiring the lights and wanted to see what they looked like with the overhead lights off, forgot about the LED shop light inside. :rofl:
I have the 440 source Roller rocker I want to do a roller cam and lifters with 440 source CNC ported heads I have the RPM intake and 2” full length headers I want to do a hydraulic set up im
Not a rich man but I’ve put money away for this and just need to know my limitations on sizing. I’m...
Sounds like your console has been trimmed wrong and there is no plastic there. Look at the photos below. The far right (3rd) bracket has an oblong hole on the driver's side where the screw goes. Now look at the console on the front where the oblong slot is that is where the screw goes but is...
Do you mean roller lifters or rockers? If roller lifters do you mean hydraulic or solid?
What is your budget?
Hyd roller cam and lifters is cheaper than solid roller but still a $1000 not counting valve springs,pushrods,etc.