Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking at the pics a little closer, it looks like the fork is not hitting the pivot in the right spot, the groove where it is supposed to. I may be wrong as its hard to see.
When I first installed my Lakewood, the throwout bearing actually slipped off one side of the fork, it was a mess.
I...
Ha ha. I assumed I might have to accept some shaming for asking the question.
But what do you have against hot Vegas girls? - no matter what they’re wearing …
:lol:
I have conflicting info on this. Some say the fuel pump has a check valve and some say it drains back to the tank. Are you sure it drains to the tank? My apologies just want to double check.
I tried pushing down on each lifter with push rod and couldn't move any of them. First picture is scotchbrited lifter, last two are from cylinder 6, where I believe ticking was coming from. I didn't see this yesterday, but once I wiped them off and looked in good light, at some point, they are...
Here are some close ups of the rotors and spindles. From what I can see, they look to be the Bendix stuff based on other pictures I found online. The guy selling the stuff said he should theoretically have the callipers and master cylinder/booster combo but has no idea where those parts are at...
FYI, I only use ethanol-free gas. I read that the fuel pump is supposed to have a its own check valve so not sure if it goes back to the tank or just the fuel pump.
The car original had a 318, it was replaced with a 72 440. The carb is a Carter 4 bbl. Not sure if that helps with the...
Any particular brand and size of these parts? Is the (modern alignment) possible with stock type components? I did do some reading here but it mainly turned into long controversy.
Hi good question and no, no entirely sure. I just went and opened up the air cleaner and the choke was closed and then I gently opened it and then it retracted. It was a tiny bit sticky to close so I sprayed some Corrosion X on the linkages and it retracted a little better but that doesn't...