Search results for query: *

I'm looking for input on the quality of reproduction circuit boards. If you bought one; what's your satisfaction level with it. Thank you! https://www.classicindustries.com/product/all-years/dodge/all-models/parts/mb192005.html

Has anyone repaired one of these? How did you do it?

I put a '69 K-member in my '64 Dodge Polara for the sole purpose of the idler arm stability offered with the through bolt of this year. I put a brand new Mood idler arm in, and still have an unacceptable amount of up and down play right there at the through bolt. Firm Feel offers idler arms...

Can someone tell me what case this ring and pinion goes to? 3507324 I'm looking at a 2.94 gear set for an 8.75 rear-end, but I don't know what case it's for. Thank you.

I would like to see how aftermarket sway bar tabs are installed on control arms that don't already have them. Does anyone have a photo they can post of how they've done this? Thank you!

I've got a brand new set of Edelbrock E-street aluminum heads in my '64 Polara 383. I managed to strip the #3 spark plug hole. I attempted to clean-up the threads with a spark plug thread chaser, but that too would not lock on to the original threads. After much effort at recovery; the hole...

I installed an electric fan which draws 23.5 amps. Not to my surprise, my alternator isn't happy. It's almost maxing output according to the gauge. I'm considering a Powermaster alternator which claims to have an output of 75 amps. Considering where my gauge needle is, I don't feel 75 amps...

I've got this damn near new timing chain that I bought for my 383. Think it's a Cloyes. I ran it a short time around town, doubt if it's got 1k miles on it, before doing a rebuild. I would have reinstalled it, but my new cam takes the three bolt mounting where as this chain requires the...