Search results for query: *

Hey guys. I have Dr. Diff manual disc brakes front and rear. I just bled all the brakes, but when I finished the last caliper (front drivers side) the brake pedal stopped returning all the way and is activating the brake lights. It didn't do this before I tried bleeding the brakes. Any...

Hey guys. Just got my parking brake cables from Dr. Diff and I'm not sure how they install. It looks like the end just slots into the bracket, but doesn't seem to have a clip or retainer in that spot. Do I just pinch that bracket together? Also, is there supposed to be something on the axle...

So i am working on replacing drum brakes on my 63 Sport Fury and discovered the axle nut on the drivers side was smaller than the passengers side. Is that normal?? I got both of them off no problem, just curious if there is a reason for that.

Finally got this thing off. What a pain. Any tips for installing the new one (other than do it before the dash and everything is installed)??

I was looking at Dr. Diff's rebuild kit but that was only for '65 and up. Anyone have a source for a rebuild kit for a '63? Thanks, Jesse

I just finished rebuilding the suspension on my 63 Sport Fury and need to get my ride height set. I think I just need to measure from the ground to top of the wheel well and adjust the torsion bar adjuster until it's at the height I want it? Am I missing anything? Thanks!

My lower control arm doesn't have sway bar tabs on it. I searched around on this site and it looks like in 1963 the optional sway bar didn't attach to the LCA? The FSM doesn't say much about it, but it does mention a frame bracket. Could I add the sway bar tabs to my lower control arm and use...

hey guys. I need help removing the idler arm on my 63 fury. I checked the FSM and it just says remove using tool A-8394. I googled that tool and it says pitman arm puller. I can see how it’s used but with the idler arm sitting in the “cradle” on the k member I can’t tell where to place the...

Hey guys I need some help. I am trying to remove the passenger side upper control arm on my 63 sport fury. I got the bolt out no problem on one side but can’t get the other to budge. It moves in and out in the adjusting slot when I turn the bolt but I can’t get it to slide out. I took the nut...

Hey all, I have searched the forums and looked online at photos and cannot tell how my power steering pump mounts to the engine. I think I may have the wrong combination of brackets?? This is what I've got. The pieces that are attached were on there when i took it off years ago (and of...

Hey guys, I found this Aspen at the junkyard today. I think this may be a donor car for a b body disc brake conversion?? I don't know what year it is, i didn't climb up there looking for a fender tag.

So I have been thinking about my plans for suspension on my 1963 Sport Fury. Originally I was planning on going whole hog with a magnum force set up or one of the equivalents. I'm thinking now that may be unnecessary and way more money than I have to spend. I am only building the "Beast" into a...