• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. O

    Hurst Shifter ****

    That's Jackie Hart
  3. O

    Flywheel rubs against inspection cover

    It looks like the flywheel is the problem I would not use that one. A replacement 143 tooth 11 inch flywheel should be the fix.
  4. O

    Flywheel rubs against inspection cover

    So you have an iron 11 inch bellhousing casting number 2892262
  5. O

    1971 383 carb

    Yes the Dealers replaced them because those Holley carbs originally came with cork gaskets that would shrink and start to leak fuel.
  6. O

    Hurst shifter - long throw

  8. O

    Correct Carb for 1971

    A 1971 383 4BBL car also came with a 625 cfm Carter AVS carb #6125S
  9. O

    Flywheel question.

    That car will come with a 11 inch flywheel with a 143 tooth ring gear. It's alright to reuse the flywheel hairline cracks are only on the surface.
  10. O

    A-833 4 speed transmission diagnosis

    If you didn't have noise before this new problem started, it is possible the noises could be coming from the clutch.
  11. O

    Original Fan? Radiator re-core (if needed).

    The upper rad hose on the 2949055 radiator is located on the passenger side.
  12. O

    Help me tear down and inspect my 440..

    Inside the ARP box there should be a piece of paper with the torque specification.
  14. O

    Fred Lorenzen, NASCAR Hall of Famer, dies at 89

    R.I.P.
  15. O

    Strange Behavior Of New AVS2

    This picture shows the Edelbrock 650 CFM AVS2 carb and it's still a square bore.
  16. O

    Help me tear down and inspect my 440..

    The 8519 is a OEM stock replacement gasket. The 1009 is a performance replacement gasket. Which cylinder head gasket did the engine have in it before?
  17. O

    Help me tear down and inspect my 440..

    I would use the Fel-Pro 1009 head gasket
  18. O

    Help me tear down and inspect my 440..

    So your almost finished the cylinder heads. Did you follow the instructions?
  20. O

    Strange Behavior Of New AVS2

    So you installed a square bore carburetor onto a spread bore intake manifold with one thin gasket. If you install the seal plate and 2 gaskets (shown in post #12) the engine will run better than it does now.
  21. O

    70-2 2 piece rotor - How to tell original?

    That rotor looks like it's in good condition. Do you have pictures of the other rotor?
  22. O

    Running Ruff Low Power

    Did it start running ruff after you installed the fuel pump?
  23. O

    Ron Mancini has passed on...

    R.I.P. Ron
  24. O

    Alcohol in gas

Back
Top