Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Motor up side burned out, ;probably from excess side loads on the driver side frame. So....if i disconnect the rams, can I easily lift the top to close, or will I need an actual normal strength human to help? :(
One of my screws is long gone. 63 SF convertible. The teinsioning wires hook on here, and there is a shoulder on the screw so that the end loops can rotate freely. See photo. Anyone know of a source? Thanks.
Every piece of the vert frame is rust free, except the front bow into which the top material folds or is tacked. I cannot find a replacement from any supplier. Am I searching under the correct name? Anyone have a parts diagram for the 63 top? Thanks.
I have the top and pad, but...will the pad fit? I think my original 63 did not have a pad, and my current 63 Fury vert does not have a pad, but the top was installed by an amateur. Help please!
Any info out there on proper code paint for the RWB front and rear emblems on my 63 SF ? Curiously, the original, 60y old front, round emblem paint is intact, but the rear, horizontal has badly worn colors! I can go to a hobby shop and match, but, I'd rather go original, if info is available...
Here in the Peoples Republic, Portland OR shops want $22-2400 to replace the top on my 63 SF vert. . No extra work; the mechanism is perfect. So... I think i shall try myself. Maybe with a semi-pro helper. Advice please!
PS: Did all 63s use the stapling trim strips? The previous owner didn't...
In reviewing this forum, I see Kee, Electron Top, YearOne, and Legendary. I have an offer from SMS auto fabrics for $695 custom bronze color for my 63 Fury vert. Anyone have advice? Thanks!
My car came with no trunk trim. I have bought both the cardboard trim, and rubber mat. From the attached photos, you can see they are close, but maybe not completely correct for this 63 SF convertible. So:
1. There is no cardboard panel to hide the trunk-seat space, in which the rain collector...
My 63 SF vert came with an inop system, disconnected. The top is usable, and can be hand raised and locked. I have 2 good actuators, but the left side actuator is not in line with the mating lever on the frame. The right aligns perfectly. The bottom connecting mounts seem welded to the floor...