Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well this is a fun one. I got the 1157s in, I swapped out to led flashers, it took a little pushing and I had to tap the flasher a couple of times, but I sorta have lights. The front running light, turn signal, and hazard work great. The rear running light, and turn signal work great. However...
I can not add a comment to this as I no longer drive at night these days. I do agree that the blinding brightness is really bad and a nuisance. I am wondering if this happens because the lights are no longer adjusted like the older ones were. The trick I learned when I had to drive at night was...
...So I bought a pair from Amazon and stuck them in this morning and they worked great. They are a red LED so not only are they bright but they are bright red too. One thing noticed is they are substantial in heft - definitely not a cheesy piece of cheap plastic and LEDlights stuck in a 1157...
I like LEDs, don't get me wrong...much more energy efficient, almost no heat...I swapped out most of the interior lights in my Grand National with blue LED bulbs, they're brighter than ordinary white bulbs and give it some character.
Hello,
I bought new Autometer gauges that have all LEDlights. It came with a dimmer switch and it says to splice it in all the white wires.
I have 6 gauges, so would I take all 6 - 12V wires splice together with only the switch. And the Purple wire to the 12V dimmer switch?
Does the...
A mystery! I had an OEM bulb burn out in the idiot light bar on my modified console after doing a long car cruise where I was on the brakes a lot for over an hour. (Had wired it to show left & right brake lights). I disassembled the console, a bee-itch to do, finding that socket looked...
I am looking to convert my taillights to led. I ordered my bulbs from Superbrightleds and the bulbs work for the 1st light and for the reverse lights but the center light does not work.
The bulbs I ordered were these, which work in bulb location 1 and flash when i use the turn signals. When in...
This thread needs some clarifications.. :rolleyes:
1. The Holley retro-brights were introduced >2 years ago, at that time there was little competition.
2. Regarding Octane before I bought the Holleys, I visited their store looking for LED headlights. At that time the only 5.75" LEDs that was...
On the tail lights I just used the bright white. What was funny I put just one LED in and if the tail lights were laid out right to left it would have looked like they were sequential.
My Aftermarket Electric Fan Harnesss and Led Tail Lights Call For Chassis Grounds
Any Issues With Me Running These To A Junction Post That Runs To The Negative Battery Terminal ?
Modified exhaust absolutely get a ticket IF the cop wants to pull you over or if they get complaints. I had someone complain about my open header 426 hemi a couple of weeks ago. Under body Neon/LED definitely in some states/cities, banned in CA when I lived there and another reason to get pulled...
72 charger, digitail LED rallye tail lights, everything was working fine, now turn signals only work when parking light /headlights are off, turn on parking or headlights, lose all signal to the back of the car !
turn signal switch ?? i checked all connections, fuses, etc..
i changed the...
For me stock parking light bulbs and LED taillights, the stock flasher worked.
LED parking lights and LED taillights required an electronic flasher. I used a neutral polarity flasher, grounded to the ashtray frame, so I didn’t have to mess with the factory plug.
My stock hazard flasher still...
Could you show me the comparison in amperage because even still the Octanes still draw way less than the old halogen lights. Looks like the Octanes are brighter. Maybe why more Watts?
I did all this back in 17 and im only interested in the 4 lights on low conversion which I just figured out. Depending on your charging system it’s only going to cost you around 3 amps total to go to a 40 amp bulb and they are way brighter. Octane already has a 25w bulb which would be good for...
The new tail lights are LED panels from digi tail. I’m using the sockets to get signal for running, turn signals and brake lights from socket pig tail to operate the lights. All the gounds are soldered and heat shrinked.