Search results for query: *

Can someone show me placement of hood to cowl seal on a 1969 coronet 440 trim line. I bought a new seal and the mounting holes do not line up at all.

Hi guys. So I bought a pertronix 3 custom curved distributor for a my first 440. It had 906 iron heads. With my new motor it does not clear the aluminum heads. I’ve clearenced both the heads and distributor and it’s still to tight. His replacement distributor and box is about 800.00...

Happy New Year Eve! So after I found out my engine was junk I had the new quality engine builder write me a quote to build a fresh engine. My original block was done, crank was shot, only real things saveable were the rods, intake (M1), and possible re-grind of the bullet racing cam...

I have just returned from the professional engine builder i am now using who has told me my engine is junk. In 2013 I bought a 727 from a member here (or possibly former member now), and started discussing engines. He claimed to be a builder and could easily build me a 440. I entered into a...

What is a fair price for clean polishable tail light trim for a 69 net. Mine are pitted and with being pot metal very expensive to replate. Also, they don’t re-pop those yet. Thanks.

Has anyone heard from Richard? I wrote him a while ago and just emailed him and got nothing back. I heard Carlisle was a blustery mess. Hope everything’s ok. Erik.

Trying to figure out what happened. Only 300 miles on this motor. Out it comes.

Does the 69 coronet have door sill plates or is that a RT/bee trim level piece? Thanks.

Hi 69 coronet 440 2 door ht top. I have this part left over. Thanks.

I want to add functional marker lights to my 69 coronet instead of just reflectors. What are my options? I can build my own housings I guess. Thanks.

Hey guys If your interested in getting LED tail lights for your 1969 super bee email [email protected]. They just said to speed up development process they need to be shown interest by multiple parties. They make them for almost every year of charger already. Amazing quality. Check out...

hi I want to run the digitails led tail lights but they only make them for the 69 coronet 500. Not same tail light as the 69 bee. Can I use 69 500 tail lights with a super bee/440 tail panel or will there be interference? Thanks.

anybody here add a hand brake to there 8 3/4? I just watched the latest junkerup on you tube where he added one to his general for auto cross. Looks like a lot of fun! Oh, he put a pistol grip on it too. Extra fun!

Has anyone used the digitalis led tail lights? Is there a difference between the tail light housings on a coronet 500 1969 and a 440 coronet?

Hi I rewired my car with the complete American auto wire harness. I used LED bulbs in everything. My car is a 69 coronet 440 sub model that only had side reflectors but I’d like to use them as true marker lights. What housings and lenses should I be looking for? Thanks!

Yessss!! Drove to get gas today. First out of neighborhood. Ran good. Third gear didn’t kick in till 65 is that ok? I’ve got a tf2 transgo kit, bpe kick down, 3.55s, and a huge plate style trans cooler but no gauge hooked up yet. Don’t wanna burn up the trans. 2nd gear hit at 40. Felt awesome...

Hi Trying to troubleshoot my speedometer issues. My transmission case (727) is a 66, but it’s got 71 guts in it. The cable is the 69 that came with the car. Is there a difference in early vs. later case 727 as far as the receiving end on the trans for the cable. I have a non-working...

Is there any company’s making nice stainless or billet coil mounts for manifold location coil placement. Mine is UGLY.

A little pissed right now. I was going to insure my 69 net with State Farm on their antique collectible policy. I stated my car would cost a 40k to replace (car completely built from ground up, paint, engine, etc.) and mostly done by me my dad. Their underwriters come back with a valuation of...

Getting ready to bolt front bumper on for mock up. What size are the bolts that bolt the bumper frame to the main frame. 69 net. Thanks. Erik.