Search results for query: *

So what should i go for? Which system is easiest to switch to?

So i want to buy NEW calipers, i looked at Rockauto and they have 1 type that is NEW called (DYNAMIC FRICTION) and the rest is reman. Anyone that are using those calipers or have any tip on where i can find good new ones? They have to fit 15"

So i got my booster rebuilt, after trying a NEW booster which was faulty and modified the OE bracket so my question is are there different bracket more than the bigger on and the smaler one? The one on my 70 Charger (the one on the drying rack) had 4 holes for the booster and 2 smaler one on...

So i took apart my booster for my 70 Charger, i filmed it all but it sliped out of my hands so there are some pieces that i dont know where they go. What i know there are 2 versions of these, i got an exploded view of the other one that i don't have. Do anyone have an exploded view of the...

So i think i need to change som of the orings in my combination valve, does any of you know what size all of em is? It the one on the left in the picture

Never had any issues with bleeding brakes EVER until now when i had to buy a new proportioning valve. Thoes plastic bleeder thingy won't fit, i tried gravity bleed with no luck. I got fluid down to the block, front calipers bleed fine, but no fluid goes through the block to the rear brakes.

Which is the best distribution block to buy for a car with discs in the front and drums in the back with OE fit.

So i bought a new brake booster for my 70 Charger from summit, Summit Racing SUM-760171 Summit Racing™ Power Brake Boosters | Summit Racing The mounting studs dosent fit and the the hole for the pushrod is also to small.... Is this just what it is to buy a " direct replacement" part like this?

So i had to buy a new brakebooster, as shown in the pictures the little one on the right is what it came with, to the left of that is the one from the 53 yr old OE one. And the longer one is what i had to get cause the little one was to short for my setup. I couldnt find any measurement in...

https://www.doctordiff.com/aluminum-master-cylinder-kit.html

Anyone using this in there cars? https://www.doctordiff.com/aluminum-master-cylinder-kit.html Also the 4 piston calipers? https://www.yearone.com/Product/chrysler-b-body/ng669#prettyPhoto

My shitty *** master cylinder dosent seal around the "cap" is there a more modern and better master that would fit my 70 Charger?

Anybody know how the seal should be placed, its the top end of the steering box for my Charger

Is there a rebuild kit for the steering pumps? Like the o-rings?

Hi guys! So i just wonder if the brakes on my 8-3/4 on my Charger may have the selfadjusting brakes?

First sorry for my bad English, The thing is tha i was about to take the first jurney after the restoration but when i brake the pressure dosent get back without helping the pedal up again, The brakecylinder is "newisch" but the booster is old, the onlything i have done is cleaned it and...