Search results for query: *

Can I swap intakes on a 440 with valley pan by just swapping intakes and installing new intake gasket ? Motor is 440 with valley pan I am going from a Weind single plane to an Eddy RPM performer dual plane . Am I missing something ...

What Super Stock spring is best for 1965 Satellite 3400 lb. or 3600 lb. it will see limited street use ? Will I need snubber for hard launches at the track ? Your thoughts are greatly appreciated . Thanks for your input . old gassser

Broke Yoke The pinion yoke broke as you said on the corner not in half , do I need to inspect everything or can I just get new yoke and move on ? Would there be damage to ring and pinion as well ? I also seem to have the slip yoke stuck in the tailshaft of the trans broke the front u-joint also...

Crush sleeve or shim The rear end is a Dana 60 . Pinion nut came off fairly easy what does that mean if anything ? Thanks for your input and consideration .

After getting a good look I have noticed that I also broke the pinion yoke does the large nut that holds it have a certain adjustment after being reinstalled? As always your help is invaluable Thanks again.

Thanks for your help First I would like to thank everyone that replied to my post , your help is great ! A bit more info it is a 440 .055 over 850 holley cam Howards hydraulic .522 intake and .555 exhaust reworked 915 steel heads Ross racing pistons compression 11:1 headers in a 1965 Satellite...

I recently broke both U-joints at the track leaving hard , it's a stick . The drive shaft was contained in the drive shaft loops. I plan on upgrading the u-joints , looking for the best way to tell if drive shaft is straight enough to use . Any thoughts are appreciated .

Got a brand new 440 all new internals .055 over ,new oil pump , cam, bearings , crank turned all new runs great ! My question is on start up it takes 1-2 seconds for oil pressure to come up and sits at 65 + lbs . cold then holds 45-50 lbs at idle after warmed up , do I have any cause for concern ?

MT on 65 Satellite Thanks for your help , tires fit like a glove .

Has anybody run Mickey Thompson ET Street Radial 255 60R 15 on a 7 " police rim on a 1965 Satellite with stock leaf spring location ? Will this fit or rub on the leaf springs ?