Search results for query: *

Three times I've installed the new mechanical fuel pump in my customer's RV and it has no more fuel pressure than when I got it. Yes, the arm is installed UNDER the pushrod that I put a dab of grease on to hold it in place during installation. I have tried "priming" the line,using a 5 gal can...

Short term get a can of starting fluid. Make sure the choke closes fully and opens about a 1/4" when it fires. I've seen a bad 4 pin ballast resistor do this on the start side of the ballast. The exact symptoms

This is an unused set that has been opened (I did a f*cky-wucky and got the set with the 1.5" bushing eyes instead of the 2" set). Otherwise complete except for the grease (I kept that for myself, because I'm greedy and use a lot of it). It includes four of the 1.5" bushings for the front, and...

.https://youtu.be/QpPtAvvetR

These are some l found that seem close. Seeing IBM was the major player as well as doing the IBM cards, l have to think it was a specific IBM font, like these

I need a set of front fender inner splash shields. New, used or reproductions are fine

As it is, there were very few 440 Road Runner/ GTX cars made in 1973. A number like 267 comes to mind but is probably wrong. Regardless, there were very few. Sunroofs were also fairly uncommon, as is blue with a red stripe. I'm looking forward to pictures of the car!

I would try a wanted ad on C bodies only... Or call Murray Park...

My son has a 1980 power wagon, stock 318 with an edelbrock afb type 4bbl carb, auto transmission. The engine is worn out and down on power, but starts easily when it's above 40 degrees and runs fine. When it gets into the low 30's it's a crap shoot if it will start or not. Yesterday it...

ya.. the early B body used them as well until mid 62 i beleave

Looks like a 64 Chrysler C body mount

Had a 64 300 Chrysler idling in front of my garage door in neutral, as I was topping off trany fluid. Suddenly it started moving forward...I tried pushing against it, but it kept coming, gaining speed, and I danced out of its way just in time for it to slam into the front of my 65 Coronet 500...

Generally speaking, single guys get it more than married guys.

unless you have your foot in all the time the pump is over kill i run the 255 on my 451

cool take your time and read and read and read the install instructions and watch the you tube videos by fitech and a few others. the more you learn the e-z er it gets.

How cool is that! Notice how the water is disturbed below the plane moments before touchdown.

https://www.dailymail.co.uk/news/article-14382541/plane-crash-runway-scottsdale-arizona-airport-flights-grounded.html

Welcome

a friend of mine did a HP70 and 392 swap in a 69 charger . its documented pretty well on you tube under Lukes Garage