Search results for query: *

Looking for a new or lightly used 7186 Edelbrock Peformer RPM intake with no modifications. PM me here if you have something within 300 miles of Savannah,Tenn...THANKS!

Yeah. he might try flattening the flute at the cutting edge, using a drill press and keeping the speed under 250 rpm...with a good grade cutting fluid. Since the EPA and the associated 'controllers' have made the old rapid tap/white lead or cintap unavailable I imagine it's not going to be an...

As a former DOD machinist, I recall several machining operations on inconel but don't recall it being difficult to cut, just used different cutting tools/carbide/procedures. Of course, I'm used to the old SAE tensile strength qualifications/specs. Sounds very good. Thanks...wb

Two 489 Yukon after-market cases (one new one slightly used), both Moser 35 spline spools, new bearings & new 1350 u-bolt pinion yokes (companion), one with new Richmond 4.30 gearset, the other with slightly used 5.12 Richmond gear set, $850 for the 4.30, $800 for the 5.12, PLUS shipping from...

472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and installed a new...

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel and Chrysler 3 and 4spd transmissions. All parts included as from the factory, including blockplate, all fasteners and reducing rings $900 plus shipping. PM me here if interested, thanks.

Standard bore 1970 383 block, missing main caps; it's been cooked, clean, shot blasted and magnetic particle inspected with no damage. Casting no. 2468130-8, dtd 10-24-69, no vin on the pad, S 383 and it has the letter stampings on the oil pan rails that designate piston sizing (DDDE/DDDE). If...

Supposedly new 5.57 8-3/4 gear set for 489 case, brand unknown but it is stamped USA with the 'heart' stamping. I got these and a set of 5.38s 2 years ago installed with spools, but decided they're probably a bit too low for my current project. I removed them tonight and will replace them with a...

These rascals are $1160 now, from Summit. If you have an A-body these fit without hammering the pinch weld or beating up the tunnel/firewall like the Lakewood units require and they're lighter too; these are excellent units.

PM sent

Reduced to $250 plus shipping

Why...wired to the starter relay (just as a 12v source?) and what type/brand of a switch are you using off the clutch pedal?

Don't discount Jack Forte at Turbo Action as he still makes a very good race converter...Phone: 904-741-4850

NOS alumiunm throttle bracket for 4 bbl carburetors, dual retrun springs w/adapter, never bolted on, $30 plus shipping from Savannah, Tn. PM me here if interested, thanks. As a side note, I forgot to mention the clamping bracket is probably for an after-market Locar-type cable, not the OEM type.

New in-the-box Edelbrock Performer intake manifold for the low deck 361-383-400 engines, still wrapped in plastic, $300 plus shipping from Savannah, Tn. PM me here if you have an interest, thanks!

It's looks like I'll be going back to work, SOOOO...I'm looking for a .0001" test indicator, Federal/Starrett/Mitutoyo/Brown-Sharpe/Interapid, no imports, nothing needing repair, must pass calibration/certification. 12-24" vernier ht gage, no damage/no rust/no imports, same American-made...

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel. All parts included as from the factory, $950 shipped within the continental 48 states. PM me here if interested, thanks.

Fletcher's been at it for a long time and has honed his driving skills quite well, and you're right...he IS tough to beat!

Might be a good idea to do a leakdown and cranking compression test for starts. Is that oil fouling and particles on the electrode and ground strap? Open the gaps to .045" and check your plug heat range. It's hard to tell from a picture like that as you need to be able to look down INTO the plug...

New parking brake cables for 62-65 B-body/62-66 A-body, $65 plus shipping from the Savannah Tn area. PM me here if interested and thanks for viewing...wb