Search results for query: *

I'd rather be snowed in at Wayne's :bananaweed:

Just a note that "Streetside Classics" is in Dallas/Fort Worth and Tampa. That is to say... Earth Motorcars in Dallas sold (or traded) the car to Streetside Classics in Dallas and then they shipped the car to Streetside Classics in Tampa.

The weather in the Bronx is like summer compared to where Wayne is.

Have you thought about your clutch at all? 2.76 is gonna be a real challenge for clutch life probably even more so with big torque.

The heads should flow .600 and the springs good for .600 , but a .490 cam? Leaving good power on the table. And I don't mean rowdy large duration power.

Hopefully 3000 to 4000

Another decent rocker setup that isn't terribly priced are the Mancini aluminum made by Harland Sharpe. They don't have needle bearings like the more expense HS's. I also think your power estimate is on the light side. I would guess a solid 550 hp and ft.lbs.

Nobody.

Absolutely. And there's no standard thickness.

My roadrunner 1969 has the front fender support rod braces my 73 challenger does not were there any on the e body challengers there are factory holes on the bottom of fenders but dont know if they are for thanks all

Who offers a cast iron roller cam?

Hemi dual carbs were tougher to tune. And easier to UN-tune. I heard the early carbs don’t perform as well as later ones too.

The combo looks good for the 2.76 gears. Changes I would consider; Hyd roller cam with similar specs instead of flat tappet. Maybe have one custom ground for your requirements(Dwayne Porter comes to mind-he just did one for my 505). Hydraulic Roller Camshaft; 1959 - 1980 Chrysler 383-440 2000...

How many miles a year are you going to drive it.

Cleaned up the laneways this morning and then decided I owed myself a relaxing afternoon. Did an oil and filter change on the hemi Satellite to improve my mood! When you have no idea what the non factory pan holds. Let's get her done. Factory K frame skid plate and a non factory Milodon oil...

hi doing the finishing touch on a max wedge clone car i would like to run dog dish on the front only i know that the original were 10 inch but does anyone know if a 9 inch reproduction cap that looks close is being made i dont want to change the rims and are the vented tubes on the max wedge...

Yes those do look like they could be a big improvement. I could also run more lift if I chose those. Thanks

"Ed Sullivan ruined this country" :mad: