Search results for query: 340

Working on my brother in law’s 340, the single groove alternator pulley does not line up with the crank and water pump pulleys. It had a home brewed bolt and spacer arrangement that was pretty nasty looking so I ordered a reproduction pre-70 bolt and spacer kit. If I lay a straight edge across...

This is an SE and the 340 was not available in an SE. The second tag is an inspection tag and has nothing to do with how the car is equipped. Someone did a complete swap it looks like.

Mopar Chrysler SB 318 340 360 1.5 Stainless Steel Roller Rocker Arms W/ Hardware These ones?

1971 Plymouth Roadrunner $35,000 All original and original owner Driven 114,000 miles 340 CID Not running Automatic Exterior: Orange Interior: Black Phoenix, Arizona Craigslist Marketplace, Listed 12 days ago. Seller: Kurt Stewart 1971 Plymouth Roadrunner

Congrats on the 70 340 4 speed car the other 71 rustbucket good luck offing it

...begin: this will entail upgrade to the power train. Replacing the factory 318 (overhauled by a previous owner probably back in the '70's) with a 340 and a 340/305. In the next couple of months the rings and bearings will be replaced in a 340 (040 overbore) which has 1.88 intake valves and...

H 340 is 72 340. The 2B on the lower stamping is 1972 hamtramck built car.

Possibly, I don't know. I believe my friends A66 challenger has resonators on her 340. Again possibly cause it was a california car.

1968-70 340 Exhaust Manifolds. Needs Repair $325 obo

Bilsteins were already installed in my 70 Duster 340 when I bought it. What a nice firm, but comfortable ride for an A body. I am impressed.

'70 Plymouth AAR 'Cuda 340 Six Barrel . . .

I have 340, 383 short deck and 440 Six Pack set ups. All three have always performed well. Six Packs get a bad name due to most don't know how to tune them.

...new, master cylinder and brake lines new, new tires, new heater core, New paint painted 4 1/2 years ago, new Decals, purchased seats from a 1970 340Duster have legendary front covers in Black in box rear seat is B in great shape and has original material. Have new carpet with embroidered mats...

I just finished up giving my brother in law’s 340 a cosmetic makeover. It ran strong but leaked oil like the Exxon Valdez. After addressing the oil leaks he and I cleaned it up thoroughly and gave it a fresh coat of paint. It also got a new water pump, cap, rotor, plugs, plug wires, fuel lines...

Keep in mind... That the gear ratios of the OD transmission are almost the same as a 727 torqueflite... A good choice for a street cruiser, but if U want more options than go with a 4 speed or Tremac.. Just my $0.02... :thumbsup:

What kit / setup is that? Running the 1200 PA FiTech TBI on the Charger, and the 340 LPH drop-in pump. Did that around 10+ years ago, and the drop-in pump used a fuel line that must not have been rated for in-tank use as it got soft and slipped off the pump. Bough the Gates submersible rated...

Looking for a new/used set of forged L2322F standard bore 340 pistons. These are 12.5:1 CR. Thx, 440

340+4 ...and a hand fabricated Demon scoop. Interesting.

Looking for a new/used set of forged L2322F standard bore 340 pistons. These are 12.5:1 CR. Thx, 440

I would be concern of the engine not breathing right. 340 exhaust ports is bigger.