Search results for query: *

Look into the MAD amp gauge bypass. And do a separate headlight harness with relays that will help.

Cars Sold!!!

Don't worry about the air cleaner. Get yourself a carter bbd and bolt it on. There are probably like 2 vacuum ports on the carb. One that goes to the vacuum advance on the distributor and another that connects to the pcv valve on the drive side valve cover. You can put some rubber plugs on them...

So I'm good as long as I plug all the vacuums on the carb? Rebuilding the original carb right now. Just wanted to make sure the car would start and run without the emissions stuff. It's got a egr valve thing on too but if I'm not mistaken looks like I can just plug that off too.

Thanks!

Thanks, good luck on your project

Unlike a missing 10mm wrench, nobody misplaces one of those!

This is an interesting way to measure installed height. If I'm reading it right, you put this in place of the spring and rotate the collar until the valve is seated and the collar cannot turn anymore. That is with the collar up against the underside of the valve spring retainer. Let's say that...

I'd love to soak that down with a generous spray of DeOxIt and see if it could be revived.

Cool setup

Yes, I didn't look at the forum, only the post, changed it up...

Update: More work on the 340 Mule motor. Finished shimming (on one cylinder head) the new 340 factory style valve springs to the proper installed height by removing the springs and adding whatever mix of .015", .030", .060" shims would satisfy the spec for each individual valve. I cut a very...

Car built Dec 1965, so that would be a no...

This is an interesting conversation. My uncle bought my block through dodge parts department in the mid 70’s and had it in his 73 cuda for a short time and then I bought it from him and it’s been in my 70RR ever since. Been honed once but is still standard bore and has about 15,000 miles on it...

And Rick & others, “good” is the operative word!

Let's not get this long standing post moved lads...

Can you tell me the part # on them? I can't blow it up enough to see it. I bought a set a few years ago and they turned out to be Coronet. That's why I'm a little leery.

Fun fact a formula1 car can fit vertically through a door way

How much would you take for the factory original brown insulation material? lol

as the title says looking for 1 that has had the tops cut off and plates installed after the mods have been done,,,included some pic's so as u get the idea of what im looking for,,,,Thanks. 426 max wedge not hemi.