Search results for query: *

They have a new chrome paint and was wondering if anybody has tried it yet?

What is the best way to strip my roof bare? Tried sanding, but I going through sandpaper quickly and not getting much done. TIA!!

I was looking for all new felt and am wondering is Cat whisker brand is worth $100 more than PUI? Seems they are the only 2 companies making these parts and while I have not compared them side by side, the pics seem to show the same quality. Has anyone ACTUALLY had these two side by side...

73 charger and was wondering, do I have to weld the half pan and rear pan back in or could I use an industrial epoxy ? reason I ask, is that I cannot find a welder to weld the pans back in, that is reasonable and I trust.

Trying to remove rust from under the seat brackets and need help trying to figure out how to get to the rust? I have to brackets on the passenger side of the car that have rust in the channels under the plate. The plate is welded to the floor pan to reinforce the floorpan and it runs accross...

My new rear pan did not come the the bracket to bolt the seatbelt to the pan, so where can I get one?? Or do I have to make my own? Thanks!!

I am removing the Floor pan and hit a couple of snags. 1) there are 3 bolts on the middle hump and 2 go through the passenger side pan, I have not had a chance to look underneath. But, are these for the rear tranny mount? 2) What is the best method to break the weld seams along the front...

I have fixed all the nicks on my taillights, was wondering if it would be better to paint with chrome paint or find a place to rechrome?

How do I get the old pan out, I am replacing the front D/S with 1/2 pan and the Pass. side rear pan. Specifically, how do you get the crimped welds along the door? Grind them off?

Can I make a patch panel or should but a new 1/2 pan?

What should I do here? Both sides are like this. a) keep grinding and get as much rust as possible, the coat w/Eastwood (or other) and then use bondiglass b) replace roof c) put full coverage on the car and burn the garage down (kidding)

What is the color used for the trim piece that wraps around the back of rear side windows? Looks silverish, but mine looks so bad, I cannot tell. I know it is chrome paint on the outside edges. 73 rallye charger

I just used Rustoleum spray paint to paint my trim, would baking the pieces help harden the paint or should I use a clear coat? Knocked a piece into drywall and a piece flaked off, is why I ask.

I have suface rust all over the bottom of the hood, what is the best way to get rid of the rust, espcially in the hard to reach ares, like between the braces and an hood skin?

Should I put clear coat over the interior paint to make them more scratch resistant or is there something else I could do?

Where can I get them for my 73 charger?

What is the best method for someone who does not own a paint gun or compressor? I painted my 70 Cuda with spray can paint and it came out ok, but not great. But I used Krylon and I might have put it on a little heavy. :eusa_angel:

Where can I get replacement seals? Talking about the rubber strip between the rear and front side windows.

Wher can I get 73 b body hinges rebuilt?

How hard is it to remove the trim pieces? Also, top is already gone, so would you suggest sanding off the glue or would a remover be better? Thinking about doing the top myself, so any install help would be much appreciated. Should I do the top, before or after painting? TIA