Search results for query: *

did 72 RR's come with bench seats and non-rallye gauges? Also, what did the hood look like? any identifying traits besides the vin? Thanks

I put a 46rh behind my 340 and I finally got it back together, well almost. I was underneath making sure I had everything together when I noticed the shift linkage was not attached, well when I tried to connect it, the linkage bar was to short. After making sure the gear shift and tranny were in...

It is Missing, build sheet says it is supposed to be there, the brackets are there and the bushings look in great shape. Twofold question, if there was not supposed to be a rear sway bar, would the brackets be there and if there was supposed to be a bar, where can I get a new one?

Where can I get the o-ring for a 727/46RH tube?

Anybody have a step by step for a 73-74 b-body?

How hard is it to replace and what is involved?

got the tranny about 2" from block and now it will not budge. Any idea's on what is holding it up? 73 charger 340/727

Anybody WITH a 71-74 Charger do the swap? Would like to know how you did your cross member and pics if possible. Also, would like to know how you did the shifter bracket for the center console shifter. And what u-joint you went with for the slip yoke to driveshaft yoke? Anybody use...

anybody put a a500 behind a 340 or similar motor? Can't find any 46rh's around me, but I came across a 94 A500.

rebuilt my steering column and replaced the gearbox and now the column is 4 1/2" short of the gearbox. I checked the old gearbox against the new one and they are the same. What did I do wrong? 73 charger w/power steering TIA

My 73's is bent all over the place, so I am wondering if anybody ever retrofitted AMD's 71-72 support bracket into a 73-74? 73 charger

My passenger door does not open unless I pull up real hard on the handle, does anybody make the plastic lock rod linkage?

There are 2 metal trim rings that screws go through to help hold the panel on, does anybody know what they are called and more importantly, where I can get 4 more? TIA

Where can I get the metal rings that protect the door panel from the lock knob? 73 charger

Tryng to install carpet in my 73 charger, need help in 2 areas. How high up does the carpet go, i.e. do I need to cut out around the gas pedal or does it go just below? Anybody got any pointers on how to install the carpet where the hump meets the rear seat pan

Can ANYBODY describe or have pics of where the hood release cable goes through the firewall on a 73 Charger?? It is the last think I need to do before putting the carpet back in and I do not see a hole for it to come through.

What is the best way to remove the old woodgrain finish? Is it possible to straighten out the metal plate?

Anybody know where to get one for smalblock? Advance has ford and gm, but no mopar, go figure.

Anybody know where I can get a Replacement hose to go between the motor and the vent for a 73 charger?

Are satelites and charger fenders the same?