Search results for query: *

I appreciate it but cast iron is the only thing withing my price/performance range

Probably better off if the tree had crushed it

1962-66 361, 383 and 413 4-Barrel air cleaner with CAP breather nipple. Base has the large opening for use with a standard 68 up Carter, Edelbrock and Holley carbs. Base modded from Mopar truck or van air cleaner. $75 + Shipping

I forget the story, that may one have become the daytona roadster thingie in 69.

Lowes has a Hillman brand nylon collar that fits perfectly. You just have to drill the hole for the roll pin.

8 3/4 Rear Shock Mounts $140

Good Morning Everyone, I got another health update and I got good news and bad news. The good news is that my kidney numbers are still coming down and my urine is getting to a lighter red color. The bad news is that it looks like I am spending yet another night here in the hospital, because my...

I got the same setup as above too. Stock 7 (or is it 5?) blade fan on a HD Hayden clutch and only about 3/4" between fan and rad core. Early B's k-frame sits engine more forward than later models (makes engine to trans bolts easier to remove!). If Aluminium rad sits rearward core face further...

FBBO came through again, thank you everyone for chiming in! Closing this thread.

These cars are now up for no reserve auction, including 2 V code Superbirds, '69 4 spd RR with a Hemi, '70 Bee, '66 and '68 Chargers, ANNUAL SPRING BIG BOY TOY AUCTION - MAY 2ND & MAY 3RD - FRENCH LICK, INDIANA

Now that spring has slowly begun, my 71 Charger R/T is no longer frozen to the ground!

Mancini's sells a stiffener plate for that area, with the right bolt pattern on it. Same pattern for early B-bodies as well.

Original factory driver quality rear windshield from a 66 Coronet No major streaks, cracks or damage $35 pick up only Part is in NY, more pics available, pm me here site

cool beans.. and ya i have delt with him before.. got 1 peace axels for my hornet from him.

https://www.doctordiff.com/62-70-adjustable-master-cylinder-push-rod.html Get the smaller bore Master cyl... i went through 3 so far and am still not too happy but the 15/16 is the best yet.. You can also email drdiff and tell him what you wanna do.. he's great to deal with

https://www.doctordiff.com/aluminum-master-cylinder-kit.html And the plate on the engine side of the firewall? that unbolts.. not sure bout power vs. manual.. my car started as a manual. Also make sure the brake pedal arm has the pushrod in the top hole or you won't have the proper ratio and...

I use Trickflows on my 318.. they work well but you will end up around $2900 by the time you get rockers and pushrods and such..

I think you meant Dana 60 with 9.75" ring gear.