Search results for query: *

I mic'd all the pistons and dial bore gauged all holes. I am looking at clearance with my smallest piston in the tightest hole

" She swears the light gets brighter when it's real low " Also the owners manual says 34 miles once the light comes on ..... but it took 45 minutes to go 11 miles.

yes

Put a ring in it and measure gaps down the cylinder

I'd call 440 Source and ask. We just went through this and are sitting at about .0045" and they said to run it but to not hang it at 8,000 rpm all day long. I learned that machine shops usually under cut the bore by like .001 to make sure the piston to wall clearance is good. But in your case...

Many of the old heater core coolant valves let flow through to the core. Exhaust ran to close to the floor pan ? Plus the transmission itself will put off heat once up to operating temp. A decent heat insulation on the inner firewall and floor then pad and carpet will help alot.

Are you saying the dial bore gauge reads .0015 tighter in the middle of the bore than at the top or bottom? Doug

Needs polishing.Some pits.$20.Keene NH.US Postal money order only

Pad is black and will clean up nicely.$25.Keene NH.US Postal money order only.

You can buy it on ebay from $18.50-$32.00...

Several Big Block single groove water pump pulleys. Have 2 that are 6-7/8" OD x 2-11/16" deep - (1) blasted & painted satin black & (1) no paint, blasted. Another single groove that is 6-1/2" OD and 2-11/16" deep, no paint, blasted. $30 each + shipping

Any chance the heater fan is stuck on high? Just putting it out there :bananadance:

Two Lane isn't streaming anywhere.

Good driver quality.$15.Keene NH.US Postal money order only.

These are in descent shape.$25pr.Keene NH.US Postal money order only.

What are you calling Corporate red? 331? PP1 or ????

People certainly dressed better in '68 compared to now.

WM21HA8319705 would have an SPD of about 616 ish (mid June). 1968 LR VINS and SPDs go to at least 346XX and 717. Only tracking one type of make, model or plant limits the number of data points. The more wider the scope, the more data points and stable data. 33-1 was released for the Charger in...

Almost 3 years later and still 39.95 Billet Aluminum Water Neck - New

I have the metal tin pieces for the early GTX Coronet bucket seats. Both are in above average shape. A few minor dings in the backs.Hard to find these by themselves.$100 for the pair.I will not break up the pair..These are not rusted out.Keene NH.US Postal money order only.